[RFC PATCH 3/3] ARM: dts: stm32f429: Adopt STM32F4 clock driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




New bindings and driver have been created for STM32F42xxx series parts.
This patch integrates these changes.

Note: Earlier device tree blobs (those without st,stm32f42xxx
      compatibles for the rcc) could still be used to boot basic
      systems. Such systems rely on the bootloader to configure the
      clocks for vital periperhals.

Signed-off-by: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
---
 arch/arm/boot/dts/stm32f429.dtsi | 83 +++++++++++++---------------------------
 1 file changed, 26 insertions(+), 57 deletions(-)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index aa3b3e3..6da8d7f 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -50,48 +50,10 @@
 
 / {
 	clocks {
-		clk_sysclk: clk-sysclk {
+		clk_hse: clk-hse {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
-			clock-frequency = <168000000>;
-		};
-
-		clk_hclk: clk-hclk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <168000000>;
-		};
-
-		clk_pclk1: clk-pclk1 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <42000000>;
-		};
-
-		clk_pclk2: clk-pclk2 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <84000000>;
-		};
-
-		clk_pmtr1: clk-pmtr1 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <84000000>;
-		};
-
-		clk_pmtr2: clk-pmtr2 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <168000000>;
-		};
-
-		clk_systick: clk-systick {
-			compatible = "fixed-factor-clock";
-			clocks = <&clk_hclk>;
-			#clock-cells = <0>;
-			clock-div = <8>;
-			clock-mult = <1>;
+			clock-frequency = <8000000>;
 		};
 	};
 
@@ -101,7 +63,7 @@
 			reg = <0x40000000 0x400>;
 			interrupts = <28>;
 			resets = <&rcc STM32F4_APB1_RESET(TIM2)>;
-			clocks = <&clk_pmtr1>;
+			clocks = <&rcc 0 128>;
 			status = "disabled";
 		};
 
@@ -110,7 +72,7 @@
 			reg = <0x40000400 0x400>;
 			interrupts = <29>;
 			resets = <&rcc STM32F4_APB1_RESET(TIM3)>;
-			clocks = <&clk_pmtr1>;
+			clocks = <&rcc 0 129>;
 			status = "disabled";
 		};
 
@@ -119,7 +81,7 @@
 			reg = <0x40000800 0x400>;
 			interrupts = <30>;
 			resets = <&rcc STM32F4_APB1_RESET(TIM4)>;
-			clocks = <&clk_pmtr1>;
+			clocks = <&rcc 0 130>;
 			status = "disabled";
 		};
 
@@ -128,7 +90,7 @@
 			reg = <0x40000c00 0x400>;
 			interrupts = <50>;
 			resets = <&rcc STM32F4_APB1_RESET(TIM5)>;
-			clocks = <&clk_pmtr1>;
+			clocks = <&rcc 0 131>;
 			status = "disabled";
 		};
 
@@ -137,7 +99,7 @@
 			reg = <0x40001000 0x400>;
 			interrupts = <54>;
 			resets = <&rcc STM32F4_APB1_RESET(TIM6)>;
-			clocks = <&clk_pmtr1>;
+			clocks = <&rcc 0 132>;
 			status = "disabled";
 		};
 
@@ -146,7 +108,7 @@
 			reg = <0x40001400 0x400>;
 			interrupts = <55>;
 			resets = <&rcc STM32F4_APB1_RESET(TIM7)>;
-			clocks = <&clk_pmtr1>;
+			clocks = <&rcc 0 133>;
 			status = "disabled";
 		};
 
@@ -154,7 +116,7 @@
 			compatible = "st,stm32-usart", "st,stm32-uart";
 			reg = <0x40004400 0x400>;
 			interrupts = <38>;
-			clocks = <&clk_pclk1>;
+			clocks = <&rcc 0 145>;
 			status = "disabled";
 		};
 
@@ -162,7 +124,7 @@
 			compatible = "st,stm32-usart", "st,stm32-uart";
 			reg = <0x40004800 0x400>;
 			interrupts = <39>;
-			clocks = <&clk_pclk1>;
+			clocks = <&rcc 0 146>;
 			status = "disabled";
 		};
 
@@ -170,7 +132,7 @@
 			compatible = "st,stm32-uart";
 			reg = <0x40004c00 0x400>;
 			interrupts = <52>;
-			clocks = <&clk_pclk1>;
+			clocks = <&rcc 0 147>;
 			status = "disabled";
 		};
 
@@ -178,7 +140,7 @@
 			compatible = "st,stm32-uart";
 			reg = <0x40005000 0x400>;
 			interrupts = <53>;
-			clocks = <&clk_pclk1>;
+			clocks = <&rcc 0 148>;
 			status = "disabled";
 		};
 
@@ -186,7 +148,7 @@
 			compatible = "st,stm32-usart", "st,stm32-uart";
 			reg = <0x40007800 0x400>;
 			interrupts = <82>;
-			clocks = <&clk_pclk1>;
+			clocks = <&rcc 0 158>;
 			status = "disabled";
 		};
 
@@ -194,7 +156,7 @@
 			compatible = "st,stm32-usart", "st,stm32-uart";
 			reg = <0x40007c00 0x400>;
 			interrupts = <83>;
-			clocks = <&clk_pclk1>;
+			clocks = <&rcc 0 159>;
 			status = "disabled";
 		};
 
@@ -202,7 +164,7 @@
 			compatible = "st,stm32-usart", "st,stm32-uart";
 			reg = <0x40011000 0x400>;
 			interrupts = <37>;
-			clocks = <&clk_pclk2>;
+			clocks = <&rcc 0 164>;
 			status = "disabled";
 		};
 
@@ -210,19 +172,26 @@
 			compatible = "st,stm32-usart", "st,stm32-uart";
 			reg = <0x40011400 0x400>;
 			interrupts = <71>;
-			clocks = <&clk_pclk2>;
+			clocks = <&rcc 0 165>;
 			status = "disabled";
 		};
 
 		rcc: rcc@40023810 {
 			#reset-cells = <1>;
-			compatible = "st,stm32-rcc";
+			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
 			reg = <0x40023800 0x400>;
-		};
+			clocks = <&clk_hse>;
+			#clock-cells = <2>;
+		};
+#if 0
+	of_property_read_string_index(dev, "reg-names", "gates");
+	index = of_property_read_string_index(dev, "reg-names", "gates");
+	of_iomap(np, index);
+#endif
 	};
 };
 
 &systick {
-	clocks = <&clk_systick>;
+	clocks = <&rcc 1 0>;
 	status = "okay";
 };
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux