[RFC v4 1/4] Broadcom Bluetooth UART Device Tree bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Device Tree bindings to configure the Broadcom Bluetooth UART device.

Signed-off-by: Ilya Faenson <ifaenson@xxxxxxxxxxxx>
---
 .../devicetree/bindings/net/bluetooth/btbcm.txt    | 82 ++++++++++++++++++++++
 1 file changed, 82 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/bluetooth/btbcm.txt

diff --git a/Documentation/devicetree/bindings/net/bluetooth/btbcm.txt b/Documentation/devicetree/bindings/net/bluetooth/btbcm.txt
new file mode 100644
index 0000000..968421b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/bluetooth/btbcm.txt
@@ -0,0 +1,82 @@
+btbcm
+------
+
+Required properties:
+
+	- compatible : must be "brcm,brcm-bt-uart".
+	- tty : tty device connected to this Bluetooth device.
+
+Optional properties:
+
+  - bt-host-wake-gpios : bt-host-wake input GPIO to be used as an interrupt.
+
+  - bt-wake-gpios : bt-wake output GPIO to be used to suspend / resume device.
+
+  - bt-reg-on-gpios : reg-on output GPIO to be used to power device on/off.
+
+  - baud-rate-before-config-download : initial Bluetooth device baud rate.
+    Default: 3000000.
+
+  - manual-fc : flow control UART in suspend / resume scenarios.
+    Default: 0.
+
+  - configure-sleep : configure suspend / resume flag.
+    Default: false.
+
+  - configure-audio : configure platform PCM SCO flag.
+    Default: false.
+
+  - PCMClockMode : PCM clock mode. 0-slave, 1-master.
+    Default: 0.
+
+  - PCMFillMethod : PCM fill method. 0 to 3.
+    Default: 2.
+
+  - PCMFillNum : PCM number of fill bits. 0 to 3.
+    Default: 0.
+
+  - PCMFillValue : PCM fill value. 0 to 7.
+    Default: 3.
+
+  - PCMInCallBitclock : PCM interface rate. 0-128Kbps, 1-256Kbps, 2-512Kbps,
+    3-1024Kbps, 4-2048Kbps.
+    Default: 0.
+
+  - PCMLSBFirst : PCM LSB first. 0 or 1.
+    Default: 0.
+
+  - PCMRightJustify : PCM Justify. 0-left, 1-right.
+    Default: 0.
+
+  - PCMRouting : PCM routing. 0-PCM, 1-SCO over HCI.
+    Default: 0.
+
+  - PCMShortFrameSync : PCM sync. 0-short, 1-long.
+    Default: 0.
+
+  - PCMSyncMode : PCM sync mode. 0-slave, 1-master.
+    Default: 0.
+
+
+Example:
+
+	brcm4354_bt_uart: brcm4354-bt-uart {
+		compatible = "brcm,brcm-bt-uart";
+		bt-wake-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		bt-host-wake-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
+		tty = "ttyS0";
+		baud-rate-before-config-download = <3000000>;
+		configure-sleep;
+		configure-audio;
+		PCMClockMode = <0>;
+		PCMFillMethod = <2>;
+		PCMFillNum = <0>;
+		PCMFillValue = <3>;
+		PCMInCallBitclock = <0>;
+		PCMLSBFirst = <0>;
+		PCMRightJustify = <0>;
+		PCMRouting = <0>;
+		PCMShortFrameSync = <0>;
+		PCMSyncMode = <0>;
+	};
+
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux