[PATCH v3 2/6] arm64: Juno: Split juno.dts into juno-base.dtsi and juno.dts.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Prepare the device tree for adding more boards based on Juno r0.

Signed-off-by: Liviu Dudau <Liviu.Dudau@xxxxxxx>
Acked-by: Jon Medhurst <tixy@xxxxxxxxxx>
Acked-by: Sudeep Holla <sudeep.holla@xxxxxxx>
---
 arch/arm64/boot/dts/arm/juno-base.dtsi | 132 +++++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/arm/juno.dts       | 129 +-------------------------------
 2 files changed, 133 insertions(+), 128 deletions(-)
 create mode 100644 arch/arm64/boot/dts/arm/juno-base.dtsi

diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
new file mode 100644
index 0000000..5c4c035
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -0,0 +1,132 @@
+	/*
+	 *  Devices shared by all Juno boards
+	 */
+
+	gic: interrupt-controller@2c010000 {
+		compatible = "arm,gic-400", "arm,cortex-a15-gic";
+		reg = <0x0 0x2c010000 0 0x1000>,
+		      <0x0 0x2c02f000 0 0x2000>,
+		      <0x0 0x2c04f000 0 0x2000>,
+		      <0x0 0x2c06f000 0 0x2000>;
+		#address-cells = <0>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/include/ "juno-clocks.dtsi"
+
+	dma@7ff00000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0x7ff00000 0 0x1000>;
+		#dma-cells = <1>;
+		#dma-channels = <8>;
+		#dma-requests = <32>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&soc_faxiclk>;
+		clock-names = "apb_pclk";
+	};
+
+	soc_uart0: uart@7ff80000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x0 0x7ff80000 0x0 0x1000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
+		clock-names = "uartclk", "apb_pclk";
+	};
+
+	i2c@7ffa0000 {
+		compatible = "snps,designware-i2c";
+		reg = <0x0 0x7ffa0000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <400000>;
+		i2c-sda-hold-time-ns = <500>;
+		clocks = <&soc_smc50mhz>;
+
+		dvi0: dvi-transmitter@70 {
+			compatible = "nxp,tda998x";
+			reg = <0x70>;
+		};
+
+		dvi1: dvi-transmitter@71 {
+			compatible = "nxp,tda998x";
+			reg = <0x71>;
+		};
+	};
+
+	ohci@7ffb0000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0x7ffb0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&soc_usb48mhz>;
+	};
+
+	ehci@7ffc0000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0x7ffc0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&soc_usb48mhz>;
+	};
+
+	memory-controller@7ffd0000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0 0x7ffd0000 0 0x1000>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* last 16MB of the first memory area is reserved for secure world use by firmware */
+		reg = <0x00000000 0x80000000 0x0 0x7f000000>,
+		      <0x00000008 0x80000000 0x1 0x80000000>;
+	};
+
+	smb {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x08000000 0x04000000>,
+			 <1 0 0 0x14000000 0x04000000>,
+			 <2 0 0 0x18000000 0x04000000>,
+			 <3 0 0 0x1c000000 0x04000000>,
+			 <4 0 0 0x0c000000 0x04000000>,
+			 <5 0 0 0x10000000 0x04000000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 15>;
+		interrupt-map = <0 0  0 &gic 0  68 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  1 &gic 0  69 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  2 &gic 0  70 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  3 &gic 0 160 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  4 &gic 0 161 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  5 &gic 0 162 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  6 &gic 0 163 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  7 &gic 0 164 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  8 &gic 0 165 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  9 &gic 0 166 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 10 &gic 0 167 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 11 &gic 0 168 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 12 &gic 0 169 IRQ_TYPE_LEVEL_HIGH>;
+
+		/include/ "juno-motherboard.dtsi"
+	};
diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
index 7ab0713..d7cbdd4 100644
--- a/arch/arm64/boot/dts/arm/juno.dts
+++ b/arch/arm64/boot/dts/arm/juno.dts
@@ -91,33 +91,6 @@
 		};
 	};
 
-	memory@80000000 {
-		device_type = "memory";
-		/* last 16MB of the first memory area is reserved for secure world use by firmware */
-		reg = <0x00000000 0x80000000 0x0 0x7f000000>,
-		      <0x00000008 0x80000000 0x1 0x80000000>;
-	};
-
-	gic: interrupt-controller@2c010000 {
-		compatible = "arm,gic-400", "arm,cortex-a15-gic";
-		reg = <0x0 0x2c010000 0 0x1000>,
-		      <0x0 0x2c02f000 0 0x2000>,
-		      <0x0 0x2c04f000 0 0x2000>,
-		      <0x0 0x2c06f000 0 0x2000>;
-		#address-cells = <0>;
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
@@ -134,105 +107,5 @@
 				     <&A53_3>;
 	};
 
-	/include/ "juno-clocks.dtsi"
-
-	dma@7ff00000 {
-		compatible = "arm,pl330", "arm,primecell";
-		reg = <0x0 0x7ff00000 0 0x1000>;
-		#dma-cells = <1>;
-		#dma-channels = <8>;
-		#dma-requests = <32>;
-		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&soc_faxiclk>;
-		clock-names = "apb_pclk";
-	};
-
-	soc_uart0: uart@7ff80000 {
-		compatible = "arm,pl011", "arm,primecell";
-		reg = <0x0 0x7ff80000 0x0 0x1000>;
-		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
-		clock-names = "uartclk", "apb_pclk";
-	};
-
-	i2c@7ffa0000 {
-		compatible = "snps,designware-i2c";
-		reg = <0x0 0x7ffa0000 0x0 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-		clock-frequency = <400000>;
-		i2c-sda-hold-time-ns = <500>;
-		clocks = <&soc_smc50mhz>;
-
-		dvi0: dvi-transmitter@70 {
-			compatible = "nxp,tda998x";
-			reg = <0x70>;
-		};
-
-		dvi1: dvi-transmitter@71 {
-			compatible = "nxp,tda998x";
-			reg = <0x71>;
-		};
-	};
-
-	ohci@7ffb0000 {
-		compatible = "generic-ohci";
-		reg = <0x0 0x7ffb0000 0x0 0x10000>;
-		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&soc_usb48mhz>;
-	};
-
-	ehci@7ffc0000 {
-		compatible = "generic-ehci";
-		reg = <0x0 0x7ffc0000 0x0 0x10000>;
-		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&soc_usb48mhz>;
-	};
-
-	memory-controller@7ffd0000 {
-		compatible = "arm,pl354", "arm,primecell";
-		reg = <0 0x7ffd0000 0 0x1000>;
-		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&soc_smc50mhz>;
-		clock-names = "apb_pclk";
-	};
-
-	smb {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0x08000000 0x04000000>,
-			 <1 0 0 0x14000000 0x04000000>,
-			 <2 0 0 0x18000000 0x04000000>,
-			 <3 0 0 0x1c000000 0x04000000>,
-			 <4 0 0 0x0c000000 0x04000000>,
-			 <5 0 0 0x10000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 15>;
-		interrupt-map = <0 0  0 &gic 0  68 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  1 &gic 0  69 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  2 &gic 0  70 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  3 &gic 0 160 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  4 &gic 0 161 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  5 &gic 0 162 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  6 &gic 0 163 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  7 &gic 0 164 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  8 &gic 0 165 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  9 &gic 0 166 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 10 &gic 0 167 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 11 &gic 0 168 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 12 &gic 0 169 IRQ_TYPE_LEVEL_HIGH>;
-
-		/include/ "juno-motherboard.dtsi"
-	};
+	#include "juno-base.dtsi"
 };
-- 
2.4.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux