2015-05-21 20:51 GMT+02:00 Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>:
> On Wed, May 20, 2015 at 06:17:34PM +0200, Maxime Coquelin wrote:
>> Hi Arnd, Philipp,
>>
>> 2015-05-13 21:11 GMT+02:00 Arnd Bergmann <arnd@xxxxxxxx>:
>> > Ideally the binding should follow closely what is documented
>> > in the data sheet.
>> >
>>
>> Daniel and myself would like your opinion about this binding:
>>
>> rcc: rcc@40023800 {
>> #reset-cells = <1>;
>> #clock-cells = <2>;
>> compatible = "st,stm32-rcc";
>> reg = <0x40023800 0x10>, <0x40023810 0x20>, <0x40023830 0x20>;
>> reg-names = "clock-cfg", "reset", "clock-gates";
>> };
>>
>> It would solve a problem Daniel is facing due to conflicting mem
>> region when clock and reset drivers are enabled, as both would reserve
>> the same region.
>>
>> Also, it would make the reset driver very generic.
>> Doing that, we could even create a generic-reset.c driver that would
>> be used by STM32 and Sunxi (at least).
>> In the probe function, it would check the number of reg resources.
>> If a single resource is passed, it would take it, else it would look
>> the one named "reset".
>> The driver and bindings would be the same for the two families, and
>> the bindings would be backward compatible with sunxi ones.
>>
>> Philip, Arnd, what do you think?
>
> I lack a bit of context here, but I'd be very happy to use a generic
> driver. As a matter of fact, the sunxi reset driver is already pretty
> much there (not that it's very difficult to do).
Ok, good. The two drivers are almost the same, so squashing to a
generic one would be trivial.
>
> The only thing we did that stands out a bit is that we actually need
> the reset driver much earlier than the default probe, since some of
> our timers are maintained in reset. We have some code to do just that
> already, we just need have something similar to be on board.
We have the same problem on stm32, as just discussed with Andreas [0].
I decided to patch the bootloader to deassert timers reset, after
discussions with Rob Herring and Arnd.
Moving to a common driver, stm32 could use the same early init method
to initiliaze reset before timers.
Regards,
Maxime
[0]: http://marc.info/?l=linux-arm-kernel&m=143223846802405&w=2#0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
