From: Michael Ring <mail@xxxxxxxxxxxxxxxx> The BananaPro uses uart4 for the default rx/tx pins on the 40 pins connector, so enable uart4. Uart2 is also available at the bananapro io-pins, but like on the bananapi the primary function of the pins is to act as gpios, see: http://forum.lemaker.org/forum.php?mod=viewthread&tid=10852 Disable the uart2 node by default, but leave it in place so that people can easily enable it. Signed-off-by: Michael Ring <mail@xxxxxxxxxxxxxxxx> [hdegoede@xxxxxxxxxx: Disable uart2 by default] Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- arch/arm/boot/dts/sun7i-a20-bananapro.dts | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts index 45e2a02..4edb8a4 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts @@ -52,8 +52,9 @@ aliases { serial0 = &uart0; - serial1 = &uart2; + serial1 = &uart4; serial2 = &uart7; + serial3 = &uart2; }; chosen { @@ -253,6 +254,12 @@ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&uart2_pins_a>; + status = "disabled"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_b>; status = "okay"; }; -- 2.4.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
