* Eyal Reizer <eyalreizer@xxxxxxxxx> [150504 05:43]:
> From: Eliad Peller <eliad@xxxxxxxxxx>
>
> uart1 is used for connecting to wilink8 bluetooth subsystem.
> add the needed muxes and definitions.
>
> Signed-off-by: Eliad Peller <eliad@xxxxxxxxxx>
> Signed-off-by: Eyal Reizer <eyalr@xxxxxx>
Applying into omap-for-v4.2/dt thanks.
Tony
> ---
> Changes in v2:
> removed ti shared transport bindings
>
> arch/arm/boot/dts/am335x-evm.dts | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
> index 0f398fa..765be27 100644
> --- a/arch/arm/boot/dts/am335x-evm.dts
> +++ b/arch/arm/boot/dts/am335x-evm.dts
> @@ -191,6 +191,15 @@
> >;
> };
>
> + uart1_pins: pinmux_uart1_pins {
> + pinctrl-single,pins = <
> + 0x178 (PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
> + 0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
> + 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
> + 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
> + >;
> + };
> +
> clkout2_pin: pinmux_clkout2_pin {
> pinctrl-single,pins = <
> 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
> @@ -357,6 +366,13 @@
> status = "okay";
> };
>
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart1_pins>;
> +
> + status = "okay";
> +};
> +
> &i2c0 {
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pins>;
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
