Re: [PATCH v8 2/3] I2C: mediatek: Add driver for MediaTek I2C controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Uwe,

On Mon, 2015-05-18 at 20:43 +0200, Uwe Kleine-König wrote:
> Hello,
> 
> On Tue, May 19, 2015 at 12:40:08AM +0800, Eddie Huang wrote:
> > From: Xudong Chen <xudong.chen@xxxxxxxxxxxx>
> > 
> > The mediatek SoCs have I2C controller that handle I2C transfer.
> > This patch include common I2C bus driver.
> > This driver is compatible with I2C controller on mt65xx/mt81xx.
> > 
> > Signed-off-by: Xudong Chen <xudong.chen@xxxxxxxxxxxx>
> > Signed-off-by: Liguo Zhang <liguo.zhang@xxxxxxxxxxxx>
> > Signed-off-by: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
> > Acked-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> > ---
> >  drivers/i2c/busses/Kconfig      |   9 +
> >  drivers/i2c/busses/Makefile     |   1 +
> >  drivers/i2c/busses/i2c-mt65xx.c | 675 ++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 685 insertions(+)
> >  create mode 100644 drivers/i2c/busses/i2c-mt65xx.c
> > 
> > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> > index 2255af2..14c7266 100644
> > --- a/drivers/i2c/busses/Kconfig
> > +++ b/drivers/i2c/busses/Kconfig
> > @@ -620,6 +620,15 @@ config I2C_MPC
> >  	  This driver can also be built as a module.  If so, the module
> >  	  will be called i2c-mpc.
> >  
> > +config I2C_MT65XX
> > +	tristate "MediaTek I2C adapter"
> > +	depends on ARCH_MEDIATEK || COMPILE_TEST
> > +	help
> > +	  This selects the MediaTek(R) Integrated Inter Circuit bus driver
> > +	  for MT65xx and MT81xx.
> > +	  If you want to use MediaTek(R) I2C interface, say Y or M here.
> > +	  If unsure, say N.
> > +
> >  config I2C_MV64XXX
> >  	tristate "Marvell mv64xxx I2C Controller"
> >  	depends on MV64X60 || PLAT_ORION || ARCH_SUNXI
> > diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> > index cdf941d..abbf422 100644
> > --- a/drivers/i2c/busses/Makefile
> > +++ b/drivers/i2c/busses/Makefile
> > @@ -60,6 +60,7 @@ obj-$(CONFIG_I2C_JZ4780)	+= i2c-jz4780.o
> >  obj-$(CONFIG_I2C_KEMPLD)	+= i2c-kempld.o
> >  obj-$(CONFIG_I2C_MESON)		+= i2c-meson.o
> >  obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o
> > +obj-$(CONFIG_I2C_MT65XX)	+= i2c-mt65xx.o
> >  obj-$(CONFIG_I2C_MV64XXX)	+= i2c-mv64xxx.o
> >  obj-$(CONFIG_I2C_MXS)		+= i2c-mxs.o
> >  obj-$(CONFIG_I2C_NOMADIK)	+= i2c-nomadik.o
> > diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
> > new file mode 100644
> > index 0000000..7462f05
> > --- /dev/null
> > +++ b/drivers/i2c/busses/i2c-mt65xx.c
> > @@ -0,0 +1,675 @@
> > +/*
> > + * Copyright (c) 2014 MediaTek Inc.
> > + * Author: Xudong.chen <xudong.chen@xxxxxxxxxxxx>
> s/Xudong.chen/Xudong Chen/
OK

> 
> > +#define I2C_DRV_NAME		"mt-i2c"
> i2c-mt65xx ?

OK, i2c-mt65xx make more sense

> 
> > +}
> > +
> > +/* calculate i2c port speed */
> It would be nice to summarize the clock frequency settings here.
> Something like:
> 
> 	/*
> 	 * The input clock is divided by the value specified in the
> 	 * device tree as clock-div. The actual bus speed is then
> 	 * derived from this frequency by the following formula:
> 	 *  ....
> 
> This would make it possible to verify your calculations below.

The comment will be:
/*
 * khz: I2C bus clock
 * hclk: The input clock is divided by the value specified in the 
 *       device tree as clock-div
 * div = (sample_cnt + 1) * (step_cnt + 1)
 * khz = (hclk / 2) / div
 *
 * The calculation is to get div value that let result of 
 * ((hclk / 2) / div) most approach and less than khz
 */

> 
> > +static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int clk_src_in_hz)
> > +{
> > +	unsigned int khz;
> > +	unsigned int step_cnt;
> > +	unsigned int sample_cnt;
> > +	unsigned int sclk;
> > +	unsigned int hclk;
> > +	unsigned int max_step_cnt;
> > +	unsigned int sample_div = MAX_SAMPLE_CNT_DIV;
> > +	unsigned int step_div;
> > +	unsigned int min_div;
> > +	unsigned int best_mul;
> > +	unsigned int cnt_mul;
> > +
> > +	if (i2c->speed_hz > MAX_HS_MODE_SPEED)
> > +		return -EINVAL;
> > +	else if (i2c->speed_hz > MAX_FS_MODE_SPEED)
> > +		max_step_cnt = MAX_HS_STEP_CNT_DIV;
> > +	else
> > +		max_step_cnt = MAX_STEP_CNT_DIV;
> > +
> > +	step_div = max_step_cnt;
> > +	/* Find the best combination */
> > +	khz = i2c->speed_hz / 1000;
> > +	hclk = clk_src_in_hz / 1000;
> > +	min_div = ((hclk >> 1) + khz - 1) / khz;
> This is DIV_ROUND_UP(hclk >> 1, khz).
OK, it is good to use existed macro.

> 
> > +	best_mul = MAX_SAMPLE_CNT_DIV * max_step_cnt;
> > +
> > +	for (sample_cnt = 1; sample_cnt <= MAX_SAMPLE_CNT_DIV; sample_cnt++) {
> > +		step_cnt = (min_div + sample_cnt - 1) / sample_cnt;
> > +		cnt_mul = step_cnt * sample_cnt;
> > +		if (step_cnt > max_step_cnt)
> > +			continue;
> > +
> > +		if (cnt_mul < best_mul) {
> > +			best_mul = cnt_mul;
> > +			sample_div = sample_cnt;
> > +			step_div = step_cnt;
> > +			if (best_mul == min_div)
> > +				break;
> > +		}
> > +	}
> > +
> > +	sample_cnt = sample_div;
> > +	step_cnt = step_div;
> > +	sclk = hclk / (2 * sample_cnt * step_cnt);
> > +	if (sclk > khz) {
> > +		dev_dbg(i2c->dev, "%s mode: unsupported speed (%ldkhz)\n",
> > +			(i2c->speed_hz > MAX_HS_MODE_SPEED) ? "HS" : "ST/FT",
> > +			(long int)khz);
> > +		return -EINVAL;
> > +	}
> > +
> > +	step_cnt--;
> > +	sample_cnt--;
> > +
> > +	if (i2c->speed_hz > MAX_FS_MODE_SPEED) {
> > +		/* Set the hign speed mode register */
> > +		i2c->timing_reg = I2C_FS_TIME_INIT_VALUE;
> > +		i2c->high_speed_reg = I2C_TIME_DEFAULT_VALUE |
> > +			(sample_cnt & I2C_TIMING_SAMPLE_COUNT_MASK) << 12 |
> > +			(step_cnt & I2C_TIMING_SAMPLE_COUNT_MASK) << 8;
> > +	} else {
> > +		i2c->timing_reg =
> > +			(sample_cnt & I2C_TIMING_SAMPLE_COUNT_MASK) << 8 |
> > +			(step_cnt & I2C_TIMING_STEP_DIV_MASK) << 0;
> > +		/* Disable the high speed transaction */
> > +		i2c->high_speed_reg = I2C_TIME_CLR_VALUE;
> Can it happen that sample_cnt & I2C_TIMING_SAMPLE_COUNT_MASK !=
> sample_cnt? If yes, what is the influence on correctness? Same question
> for step_cnt.

No. it should not happen because we already limit value less than max
value. Will remove mask here.


Eddie



--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux