Re: [PATCH v4 1/7] mmc: dt-bindings: add Mediatek MMC bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 19 May 2015 at 08:36, Chaotian Jing <chaotian.jing@xxxxxxxxxxxx> wrote:
> Document the device-tree binding of Mediatek MMC host
>
> Signed-off-by: Chaotian Jing <chaotian.jing@xxxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/mmc/mtk-sd.txt | 33 ++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mmc/mtk-sd.txt
>
> diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> new file mode 100644
> index 0000000..ba6d668
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> @@ -0,0 +1,33 @@
> +* MTK MMC controller
> +
> +The MTK  MSDC can act as a MMC controller
> +to support MMC, SD, and SDIO types of memory cards.
> +
> +This file documents differences between the core properties in mmc.txt
> +and the properties used by the msdc driver.
> +
> +Required properties:
> +- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc".
> +- interrupts: Should contain MSDC interrupt number
> +- clocks: MSDC source clock, HCLK, HCLK is mandatory when it is not controlled by Infra

This seems strange. Either it's mandatory since it's under the
"Required properties" section or it should be moved to the "Optional
properties" section.

> +- clock-names: "source", "hclk"
> +- pinctrl-names: should be "default", "state_uhs"
> +- pinctrl-0: should contain default/high speed pin ctrl
> +- pinctrl-1: should contain uhs mode pin ctrl
> +- vmmc-supply: power to the Core
> +
> +Optional properties:
> +- vqmmc-supply: power to the IO(for SD/SDIO)
> +
> +Examples:
> +mmc0: mmc@11230000 {
> +       compatible = "mediatek,mt8173-mmc", "mediatek,mt8135-mmc";
> +       reg = <0 0x11230000 0 0x108>;
> +       interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
> +       vmmc-supply = <&mt6397_vemc_3v3_reg>;
> +       clocks = <&pericfg CLK_PERI_MSDC30_0>, <&topckgen CLK_TOP_MSDC50_0_H_SEL>;
> +       clock-names = "source", "hclk";
> +       pinctrl-names = "default", "state_uhs";
> +       pinctrl-0 = <&mmc0_pins_default>;
> +       pinctrl-1 = <&mmc0_pins_uhs>;
> +};
> --
> 1.8.1.1.dirty
>

Kind regards
Uffe
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux