[PATCH 7/7] ARM: bcm2835: Tie SPI clock to the core clock rate.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




We were previously using a fixed clock declared in the 2835 DT, but
it's actually the core clock, and it might not be the same if you had
adjusted it using the firmware's config.txt.

Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
---

This is the only patch in the series I haven't really tested, since I
don't have any SPI devices.

 arch/arm/boot/dts/bcm2835-rpi.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 53285a3..994c8e7 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -69,3 +69,7 @@
 		 <&firmware_clocks RPI_CLOCK_CORE>;
 	clock-names = "uartclk", "apb_pclk";
 };
+
+&spi {
+	clocks = <&firmware_clocks RPI_CLOCK_CORE>;
+};
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux