On Fri, May 15, 2015 at 06:38:57PM +0200, Jens Kuske wrote: > The H3 uses the same pin controller as previous SoC's from Allwinner. > Add support for the pins controlled by the main PIO controller. > > Signed-off-by: Jens Kuske <jenskuske@xxxxxxxxx> > --- > .../bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 1 + > drivers/pinctrl/sunxi/Kconfig | 8 + > drivers/pinctrl/sunxi/Makefile | 1 + > drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c | 522 +++++++++++++++++++++ > 4 files changed, 532 insertions(+) > create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c > > diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt > index fdd8046..c46af8e 100644 > --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt > +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt > @@ -16,6 +16,7 @@ Required properties: > "allwinner,sun7i-a20-pinctrl" > "allwinner,sun8i-a23-pinctrl" > "allwinner,sun8i-a23-r-pinctrl" > + "allwinner,sun8i-h3-pinctrl" > - reg: Should contain the register physical address and length for the > pin controller. > > diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig > index 2eb893e..6c1cec5 100644 > --- a/drivers/pinctrl/sunxi/Kconfig > +++ b/drivers/pinctrl/sunxi/Kconfig > @@ -43,6 +43,14 @@ config PINCTRL_SUN8I_A23_R > depends on RESET_CONTROLLER > select PINCTRL_SUNXI_COMMON > > +config PINCTRL_SUN8I_H3 > + tristate "Allwinner H3 pinctrl driver" > + default MACH_SUN8I > + select PINCTRL_SUNXI_COMMON PINCTRL_SUNXI_COMMON should probably be turned into a tristate as well Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
Attachment:
signature.asc
Description: Digital signature
