On 05/11/15 22:42, Krzysztof Kozlowski wrote:
> Usage of labels instead of full paths reduces possible mistakes when
> overriding nodes.
>
Well, I'm not sure what kind of the possible mistakes you mentioned...?
I don't think we need to use the label for gic, combiner.
- Kukjin
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
> ---
> arch/arm/boot/dts/exynos4210.dtsi | 43 +++++++++++++++++++--------------------
> 1 file changed, 21 insertions(+), 22 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
> index 76b84852f29c..a9a55304e31a 100644
> --- a/arch/arm/boot/dts/exynos4210.dtsi
> +++ b/arch/arm/boot/dts/exynos4210.dtsi
> @@ -52,16 +52,6 @@
> };
> };
>
> - pmu_system_controller: system-controller@10020000 {
> - clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
> - "clkout4", "clkout8", "clkout9";
> - clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
> - <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
> - <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
> - <&clock CLK_XUSBXTI>;
> - #clock-cells = <1>;
> - };
> -
> sysram: sysram@02020000 {
> compatible = "mmio-sram";
> reg = <0x02020000 0x20000>;
> @@ -95,18 +85,6 @@
> arm,data-latency = <2 2 1>;
> };
>
> - gic: interrupt-controller@10490000 {
> - cpu-offset = <0x8000>;
> - };
> -
> - combiner: interrupt-controller@10440000 {
> - samsung,combiner-nr = <16>;
> - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
> - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
> - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
> - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
> - };
> -
> mct: mct@10050000 {
> compatible = "samsung,exynos4210-mct";
> reg = <0x10050000 0x800>;
> @@ -245,3 +223,24 @@
> status = "disabled";
> };
> };
> +
> +&gic {
> + cpu-offset = <0x8000>;
> +};
> +
> +&combiner {
> + samsung,combiner-nr = <16>;
> + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
> + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
> + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
> + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
> +};
> +
> +&pmu_system_controller {
> + clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
> + "clkout4", "clkout8", "clkout9";
> + clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
> + <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
> + <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>;
> + #clock-cells = <1>;
> +};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
