Supply top level nodes for the STiH416 based development boards.
The Pinctrl configuration has already been applied, so the only
missing piece of the DT puzzle is for a board's DTB to enable
the nodes.
Signed-off-by: Ajit Pal Singh <ajitpal.singh@xxxxxx>
Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
arch/arm/boot/dts/stih416.dtsi | 44 +++++++++++++++++++++++++++++++++++++++++-
1 file changed, 43 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index eeb7afe..9ead8bb 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -104,7 +104,7 @@
interrupts = <0 210 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sbc_serial1>;
- clocks = <&clk_sysin>;
+ clocks = <&clk_sysin>;
};
i2c@fed40000 {
@@ -445,5 +445,47 @@
<&softreset STIH416_USB3_SOFTRESET>;
reset-names = "power", "softreset";
};
+
+ /* SAS PWM Module */
+ pwm0: pwm@fed10000 {
+ compatible = "st,sti-pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ reg = <0xfed10000 0x68>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_chan0_default
+ &pinctrl_pwm0_chan1_default
+ &pinctrl_pwm0_chan2_default
+ &pinctrl_pwm0_chan3_default>;
+
+ clock-names = "pwm";
+ clocks = <&clk_sysin>;
+ st,pwm-num-chan = <4>;
+ };
+
+ /* SBC PWM Module */
+ pwm1: pwm@fe510000 {
+ compatible = "st,sti-pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ reg = <0xfe510000 0x68>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1_chan0_default
+ /*
+ * Shared with SBC_OBS_NOTRST. Don't
+ * enable unless you really know what
+ * you're doing.
+ *
+ * &pinctrl_pwm1_chan1_default
+ */
+ &pinctrl_pwm1_chan2_default
+ &pinctrl_pwm1_chan3_default>;
+
+ clock-names = "pwm";
+ clocks = <&clk_sysin>;
+ st,pwm-num-chan = <3>;
+ };
};
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
