This patch fixes the following issues reported by checkpatch.pl:
- use -EINVAL instead of -ENOSYS, to fix warning message:
"ENOSYS means 'invalid syscall nr' and nothing else"
- remove unnecessary log message
- split lines whose length is greater than 80 characters
- if an arm statement uses braces, add braces to the other arms of the
respective statement, too
- match alignment with open parenthesis
Signed-off-by: Anda-Maria Nicolae <anda-maria.nicolae@xxxxxxxxx>
---
drivers/power/bq2415x_charger.c | 35 ++++++++++++++++++-----------------
1 file changed, 18 insertions(+), 17 deletions(-)
diff --git a/drivers/power/bq2415x_charger.c b/drivers/power/bq2415x_charger.c
index 6c534dc..2cf8ec7 100644
--- a/drivers/power/bq2415x_charger.c
+++ b/drivers/power/bq2415x_charger.c
@@ -631,7 +631,7 @@ static int bq2415x_set_charge_current(struct bq2415x_device *bq, int mA)
int val;
if (bq->init_data.resistor_sense <= 0)
- return -ENOSYS;
+ return -EINVAL;
val = (mA * bq->init_data.resistor_sense - 37400) / 6800;
if (val < 0)
@@ -650,7 +650,7 @@ static int bq2415x_get_charge_current(struct bq2415x_device *bq)
int ret;
if (bq->init_data.resistor_sense <= 0)
- return -ENOSYS;
+ return -EINVAL;
ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_CURRENT,
BQ2415X_MASK_VI_CHRG, BQ2415X_SHIFT_VI_CHRG);
@@ -665,7 +665,7 @@ static int bq2415x_set_termination_current(struct bq2415x_device *bq, int mA)
int val;
if (bq->init_data.resistor_sense <= 0)
- return -ENOSYS;
+ return -EINVAL;
val = (mA * bq->init_data.resistor_sense - 3400) / 3400;
if (val < 0)
@@ -684,7 +684,7 @@ static int bq2415x_get_termination_current(struct bq2415x_device *bq)
int ret;
if (bq->init_data.resistor_sense <= 0)
- return -ENOSYS;
+ return -EINVAL;
ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_CURRENT,
BQ2415X_MASK_VI_TERM, BQ2415X_SHIFT_VI_TERM);
@@ -1166,7 +1166,7 @@ static ssize_t bq2415x_sysfs_set_mode(struct device *dev,
if (strncmp(buf, "auto", 4) == 0) {
if (bq->automode < 0)
- return -ENOSYS;
+ return -EINVAL;
bq->automode = 1;
mode = bq->reported_mode;
} else if (strncmp(buf, "off", 3) == 0) {
@@ -1556,28 +1556,28 @@ static int bq2415x_probe(struct i2c_client *client,
bq = devm_kzalloc(&client->dev, sizeof(*bq), GFP_KERNEL);
if (!bq) {
- dev_err(&client->dev, "failed to allocate device data\n");
ret = -ENOMEM;
goto error_2;
}
if (np) {
- bq->notify_psy = power_supply_get_by_phandle(np, "ti,usb-charger-detection");
+ bq->notify_psy = power_supply_get_by_phandle(np,
+ "ti,usb-charger-detection");
if (IS_ERR(bq->notify_psy)) {
dev_info(&client->dev,
- "no 'ti,usb-charger-detection' property (err=%ld)\n",
+ "no 'ti,usb-charger-detection' property (err=%ld)\n",
PTR_ERR(bq->notify_psy));
bq->notify_psy = NULL;
} else if (!bq->notify_psy) {
ret = -EPROBE_DEFER;
goto error_2;
}
- }
- else if (pdata->notify_device)
+ } else if (pdata->notify_device) {
bq->notify_psy = power_supply_get_by_name(pdata->notify_device);
- else
+ } else {
bq->notify_psy = NULL;
+ }
i2c_set_clientdata(client, bq);
@@ -1592,11 +1592,11 @@ static int bq2415x_probe(struct i2c_client *client,
if (np) {
ret = of_property_read_u32(np, "ti,current-limit",
- &bq->init_data.current_limit);
+ &bq->init_data.current_limit);
if (ret)
goto error_3;
ret = of_property_read_u32(np, "ti,weak-battery-voltage",
- &bq->init_data.weak_battery_voltage);
+ &bq->init_data.weak_battery_voltage);
if (ret)
goto error_3;
ret = of_property_read_u32(np, "ti,battery-regulation-voltage",
@@ -1604,15 +1604,15 @@ static int bq2415x_probe(struct i2c_client *client,
if (ret)
goto error_3;
ret = of_property_read_u32(np, "ti,charge-current",
- &bq->init_data.charge_current);
+ &bq->init_data.charge_current);
if (ret)
goto error_3;
ret = of_property_read_u32(np, "ti,termination-current",
- &bq->init_data.termination_current);
+ &bq->init_data.termination_current);
if (ret)
goto error_3;
ret = of_property_read_u32(np, "ti,resistor-sense",
- &bq->init_data.resistor_sense);
+ &bq->init_data.resistor_sense);
if (ret)
goto error_3;
} else {
@@ -1648,7 +1648,8 @@ static int bq2415x_probe(struct i2c_client *client,
}
/* Query for initial reported_mode and set it */
- bq2415x_notifier_call(&bq->nb, PSY_EVENT_PROP_CHANGED, bq->notify_psy);
+ bq2415x_notifier_call(&bq->nb, PSY_EVENT_PROP_CHANGED,
+ bq->notify_psy);
bq2415x_set_mode(bq, bq->reported_mode);
bq->automode = 1;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
