Re: [PATCH] Show proper respect for Heinrich Hertz by using the correct unit for frequency

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Am 11.05.2015 um 15:19 schrieb Russell King - ARM Linux:
> The SI unit of frequency is Hertz, named after Heinrich Hertz, and is
> given the symbol "Hz" to denote this.  "hz" is not the unit of frequency,
> and is in fact meaningless.
> 
> Fix arch/arm to correctly use "Hz", thereby acknowledging Heinrich Hertz
> contribution to the modern world.
> 
> Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>

Nice. :) Since you're being exact, should it be "Hertz' contribution"?

> diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts
> index f5b5a1d96cd7..53ae04f9104d 100644
> --- a/arch/arm/boot/dts/omap3-cm-t3517.dts
> +++ b/arch/arm/boot/dts/omap3-cm-t3517.dts
> @@ -66,7 +66,7 @@
>  
>  	otg_drv_vbus: pinmux_otg_drv_vbus {
>  		pinctrl-single,pins = <
> -			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50Mhz_clk.usb0_drvvbus */
> +			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50MHz_clk.usb0_drvvbus */

This one looks like an identifier - did you check where it comes from
and whether it needs to be fixed there as well?

>  		>;
>  	};
>  

Rest looks good,

Reviewed-by: Andreas Färber <afaerber@xxxxxxx>

Cheers,
Andreas

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Dilip Upmanyu, Graham Norton; HRB
21284 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux