On 10:18 Fri 21 Mar , Alex Elder wrote:
> Define syscon nodes for the RCPU, RCPU2, and APBC2 SpacemiT CCUS, which
> currently support resets but not clocks in the SpacemiT K1.
>
> Signed-off-by: Alex Elder <elder@xxxxxxxxxxxx>
> ---
> arch/riscv/boot/dts/spacemit/k1.dtsi | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
> index 09a9100986b19..f86d1b58c6d35 100644
> --- a/arch/riscv/boot/dts/spacemit/k1.dtsi
> +++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
> @@ -350,6 +350,18 @@ soc {
> dma-noncoherent;
> ranges;
>
> + syscon_rcpu: system-controller@c0880000 {
I'm not sure if syscon_rcpu is good name to go, it's AUDIO Peripherals
in docs, see
7.2 Main CPU Domain Address Mapping
https://developer.spacemit.com/documentation?token=LzJyw97BCipK1dkUygrcbT0NnMg
> + compatible = "spacemit,k1-syscon-rcpu";
> + reg = <0x0 0xc0880000 0x0 0x2048>;
> + #reset-cells = <1>;
> + };
> +
> + syscon_rcpu2: system-controller@c0888000 {
not found this address mapping in above docs link
> + compatible = "spacemit,k1-syscon-rcpu2";
> + reg = <0x0 0xc0888000 0x0 0x28>;
> + #reset-cells = <1>;
> + };
> +
> syscon_apbc: system-control@d4015000 {
> compatible = "spacemit,k1-syscon-apbc";
> reg = <0x0 0xd4015000 0x0 0x1000>;
> @@ -518,6 +530,12 @@ clint: timer@e4000000 {
> <&cpu7_intc 3>, <&cpu7_intc 7>;
> };
>
> + syscon_apbc2: system-controller@f0610000 {
> + compatible = "spacemit,k1-syscon-apbc2";
> + reg = <0x0 0xf0610000 0x0 0x20>;
> + #reset-cells = <1>;
> + };
> +
> sec_uart1: serial@f0612000 {
> compatible = "spacemit,k1-uart", "intel,xscale-uart";
> reg = <0x0 0xf0612000 0x0 0x100>;
> --
> 2.43.0
>
--
Yixun Lan (dlan)
Gentoo Linux Developer
GPG Key ID AABEFD55
