[AMD Official Use Only - AMD Internal Distribution Only]
Hi,
Typo in commit message, corrected here, I will update in v6 patch.
> Add `cpm_crx` property between `cfg` and `cpm_csr` as required. Presence of this
> property results in an ABI break.
- Sai Krishna
> -----Original Message-----
> From: Sai Krishna Musham <sai.krishna.musham@xxxxxxx>
> Sent: Friday, March 21, 2025 5:12 PM
> To: bhelgaas@xxxxxxxxxx; lpieralisi@xxxxxxxxxx; kw@xxxxxxxxx;
> manivannan.sadhasivam@xxxxxxxxxx; robh@xxxxxxxxxx; krzk+dt@xxxxxxxxxx;
> conor+dt@xxxxxxxxxx; cassel@xxxxxxxxxx
> Cc: linux-pci@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; Simek, Michal <michal.simek@xxxxxxx>; Gogada, Bharat
> Kumar <bharat.kumar.gogada@xxxxxxx>; Havalige, Thippeswamy
> <thippeswamy.havalige@xxxxxxx>; Musham, Sai Krishna
> <sai.krishna.musham@xxxxxxx>
> Subject: [PATCH v5 1/2] dt-bindings: PCI: xilinx-cpm: Add reset-gpios for PCIe RP
> PERST#
>
> Introduce `reset-gpios` property to enable GPIO-based control of the PCIe RP
> PERST# signal, generating assert and deassert signals.
>
> Traditionally, the reset was managed in hardware and enabled during initialization.
> With this patch set, the reset will be handled by the driver. Consequently, the `reset-
> gpios` property must be explicitly provided to ensure proper functionality.
>
> Add CPM clock and reset control registers base (`cpm_crx`) to handle PCIe IP reset
> along with PCIe RP PERST# to avoid Link Training errors.
>
> Add `cpm_crx` property between `cfg` and `cpm_csr` as required. Presence of this
> property results in an ABI break.
>
> Signed-off-by: Sai Krishna Musham <sai.krishna.musham@xxxxxxx>
> ---
> Changes for v5:
> - Remove `reset-gpios` property from required as it is already present
> in pci-bus-common.yaml
> - Update commit message
> Changes for v4:
> - Add CPM clock and reset control registers base to handle PCIe IP
> reset.
> - Update commit message.
>
> Changes for v3:
> - None
>
> Changes for v2:
> - Add define from include/dt-bindings/gpio/gpio.h for PERST# polarity
> - Update commit message
> ---
> .../bindings/pci/xilinx-versal-cpm.yaml | 17 ++++++++++++-----
> 1 file changed, 12 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
> b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
> index d674a24c8ccc..293df91d4e74 100644
> --- a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
> +++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
> @@ -24,15 +24,17 @@ properties:
> items:
> - description: CPM system level control and status registers.
> - description: Configuration space region and bridge registers.
> + - description: CPM clock and reset control registers.
> - description: CPM5 control and status registers.
> - minItems: 2
> + minItems: 3
>
> reg-names:
> items:
> - const: cpm_slcr
> - const: cfg
> + - const: cpm_crx
> - const: cpm_csr
> - minItems: 2
> + minItems: 3
>
> interrupts:
> maxItems: 1
> @@ -76,6 +78,7 @@ unevaluatedProperties: false
>
> examples:
> - |
> + #include <dt-bindings/gpio/gpio.h>
>
> versal {
> #address-cells = <2>;
> @@ -98,8 +101,10 @@ examples:
> <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0
> 0x80000000>;
> msi-map = <0x0 &its_gic 0x0 0x10000>;
> reg = <0x0 0xfca10000 0x0 0x1000>,
> - <0x6 0x00000000 0x0 0x10000000>;
> - reg-names = "cpm_slcr", "cfg";
> + <0x6 0x00000000 0x0 0x10000000>,
> + <0x0 0xfca00000 0x0 10000>;
> + reg-names = "cpm_slcr", "cfg", "cpm_crx";
> + reset-gpios = <&gpio1 38 GPIO_ACTIVE_LOW>;
> pcie_intc_0: interrupt-controller {
> #address-cells = <0>;
> #interrupt-cells = <1>; @@ -126,8 +131,10 @@ examples:
> msi-map = <0x0 &its_gic 0x0 0x10000>;
> reg = <0x00 0xfcdd0000 0x00 0x1000>,
> <0x06 0x00000000 0x00 0x1000000>,
> + <0x00 0xfcdc0000 0x00 0x10000>,
> <0x00 0xfce20000 0x00 0x1000000>;
> - reg-names = "cpm_slcr", "cfg", "cpm_csr";
> + reg-names = "cpm_slcr", "cfg", "cpm_crx", "cpm_csr";
> + reset-gpios = <&gpio1 38 GPIO_ACTIVE_LOW>;
>
> pcie_intc_1: interrupt-controller {
> #address-cells = <0>;
> --
> 2.44.1
