On 20/03/2025 18:52, Lee Jones wrote:
On Thu, 13 Mar 2025, Matti Vaittinen wrote:
Prepare for adding support for BD96802 which is very similar to BD96801.
Separate chip specific data into own structure which can be picked to be
used by the device-tree.
Signed-off-by: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
---
drivers/mfd/rohm-bd96801.c | 83 ++++++++++++++++++++++++++------------
1 file changed, 57 insertions(+), 26 deletions(-)
diff --git a/drivers/mfd/rohm-bd96801.c b/drivers/mfd/rohm-bd96801.c
index 60ec8db790a7..1232f571e4b1 100644
--- a/drivers/mfd/rohm-bd96801.c
+++ b/drivers/mfd/rohm-bd96801.c
@@ -40,7 +40,21 @@
#include <linux/mfd/rohm-bd96801.h>
#include <linux/mfd/rohm-generic.h>
-static const struct resource regulator_errb_irqs[] = {
+struct bd968xx_chip_data {
+ const struct resource *errb_irqs;
+ const struct resource *intb_irqs;
+ int num_errb_irqs;
+ int num_intb_irqs;
+ const struct regmap_irq_chip *errb_irq_chip;
+ const struct regmap_irq_chip *intb_irq_chip;
+ const struct regmap_config *regmap_config;
+ struct mfd_cell *cells;
We're not passing MFD data through OF to be fed back through MFD APIs.
It's generally considered better to device_get_match_data() on an enum,
then populate MFD cells using that as a differentiator.
Or, at least someone has done this at the beginning and it got copied
all over the place, right? ;) Sometimes we just need to challenge the
status quo to develop ;)
I can go back to enum + switch - case in probe, and pick the correct
data there. Done that before as well. It's just that during my journey
to some other subsystems, I've realized people can often just skip the
enum and switch - case, making things a tad simpler :)
Well, not a big deal to me. I suppose it has some value to keep things
consistent inside a subsystem - and I'm not offering to drop the switch
cases from all of the drivers :p
TL; DR - Ok.
git grep compatible -- drivers/mfd | grep data
+ int num_cells;
+ int unlock_reg;
+ int unlock_val;
+};
+
+static const struct resource bd96801_reg_errb_irqs[] = {
DEFINE_RES_IRQ_NAMED(BD96801_OTP_ERR_STAT, "bd96801-otp-err"),
DEFINE_RES_IRQ_NAMED(BD96801_DBIST_ERR_STAT, "bd96801-dbist-err"),
DEFINE_RES_IRQ_NAMED(BD96801_EEP_ERR_STAT, "bd96801-eep-err"),
@@ -98,7 +112,7 @@ static const struct resource regulator_errb_irqs[] = {
DEFINE_RES_IRQ_NAMED(BD96801_LDO7_SHDN_ERR_STAT, "bd96801-ldo7-shdn-err"),
};
-static const struct resource regulator_intb_irqs[] = {
+static const struct resource bd96801_reg_intb_irqs[] = {
DEFINE_RES_IRQ_NAMED(BD96801_TW_STAT, "bd96801-core-thermal"),
DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_OCPH_STAT, "bd96801-buck1-overcurr-h"),
@@ -345,18 +359,37 @@ static const struct regmap_config bd96801_regmap_config = {
.cache_type = REGCACHE_MAPLE,
};
+static const struct bd968xx_chip_data bd96801_chip_data = {
Just call it 'struct bd968xx' then below instead of cd, use ddata.
git grep "cc =" -- drivers/mfd
VS
git grep "ddata =" -- drivers/mfd
Conforrrrrrmmm ... =;-)
I've lived through the depression of the early 90's in Finland. Learned
how to avoid wasting things - especially letters. Wouldn't guess when
reading my review replies, right?
...Ok.
Thanks for the review :) Much appreciated.
Yours,
-- Matti
