Enable support for three additional syscon CCUs which support reset
controls but no clocks: ARCPU, RCPU2, and APBC2.
Signed-off-by: Alex Elder <elder@xxxxxxxxxxxx>
---
drivers/clk/spacemit/ccu-k1.c | 106 ++++++++++++++++++++++++++++++++++
1 file changed, 106 insertions(+)
diff --git a/drivers/clk/spacemit/ccu-k1.c b/drivers/clk/spacemit/ccu-k1.c
index 17e321c25959a..bf5a3e2048619 100644
--- a/drivers/clk/spacemit/ccu-k1.c
+++ b/drivers/clk/spacemit/ccu-k1.c
@@ -130,6 +130,37 @@
#define APMU_EMAC0_CLK_RES_CTRL 0x3e4
#define APMU_EMAC1_CLK_RES_CTRL 0x3ec
+/* RCPU register offsets */
+#define RCPU_SSP0_CLK_RST 0x0028
+#define RCPU_I2C0_CLK_RST 0x0030
+#define RCPU_UART1_CLK_RST 0x003c
+#define RCPU_CAN_CLK_RST 0x0048
+#define RCPU_IR_CLK_RST 0x004c
+#define RCPU_UART0_CLK_RST 0x00d8
+/* XXX Next one is part of the AUD_AUDCLOCK region @ 0xc0882000 */
+#define AUDIO_HDMI_CLK_CTRL 0x2044
+
+/* RCPU2 register offsets */
+#define RCPU2_PWM0_CLK_RST 0x0000
+#define RCPU2_PWM1_CLK_RST 0x0004
+#define RCPU2_PWM2_CLK_RST 0x0008
+#define RCPU2_PWM3_CLK_RST 0x000c
+#define RCPU2_PWM4_CLK_RST 0x0010
+#define RCPU2_PWM5_CLK_RST 0x0014
+#define RCPU2_PWM6_CLK_RST 0x0018
+#define RCPU2_PWM7_CLK_RST 0x001c
+#define RCPU2_PWM8_CLK_RST 0x0020
+#define RCPU2_PWM9_CLK_RST 0x0024
+
+/* APBC2 register offsets */
+#define APBC2_UART1_CLK_RST 0x0000
+#define APBC2_SSP2_CLK_RST 0x0004
+#define APBC2_TWSI3_CLK_RST 0x0008
+#define APBC2_RTC_CLK_RST 0x000c
+#define APBC2_TIMERS0_CLK_RST 0x0010
+#define APBC2_KPC_CLK_RST 0x0014
+#define APBC2_GPIO_CLK_RST 0x001c
+
struct spacemit_ccu_clk {
int id;
struct clk_hw *hw;
@@ -1781,6 +1812,69 @@ static const struct k1_ccu_data k1_ccu_apmu_data = {
.rst_data = &apmu_reset_controller_data,
};
+static const struct ccu_reset_data rcpu_reset_data[] = {
+ [RST_RCPU_SSP0] = RST_DATA(RCPU_SSP0_CLK_RST, 0, BIT(0)),
+ [RST_RCPU_I2C0] = RST_DATA(RCPU_I2C0_CLK_RST, 0, BIT(0)),
+ [RST_RCPU_UART1] = RST_DATA(RCPU_UART1_CLK_RST, 0, BIT(0)),
+ [RST_RCPU_IR] = RST_DATA(RCPU_CAN_CLK_RST, 0, BIT(0)),
+ [RST_RCPU_CAN] = RST_DATA(RCPU_IR_CLK_RST, 0, BIT(0)),
+ [RST_RCPU_UART0] = RST_DATA(RCPU_UART0_CLK_RST, 0, BIT(0)),
+ [RST_RCPU_HDMI_AUDIO] = RST_DATA(AUDIO_HDMI_CLK_CTRL, 0, BIT(0)),
+};
+
+static const struct ccu_reset_controller_data rcpu_reset_controller_data = {
+ .count = ARRAY_SIZE(rcpu_reset_data),
+ .data = rcpu_reset_data,
+};
+
+static struct k1_ccu_data k1_ccu_rcpu_data = {
+ /* No clocks in the RCPU CCU */
+ .rst_data = &rcpu_reset_controller_data,
+};
+
+static const struct ccu_reset_data rcpu2_reset_data[] = {
+ [RST_RCPU2_PWM0] = RST_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+ [RST_RCPU2_PWM1] = RST_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+ [RST_RCPU2_PWM2] = RST_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+ [RST_RCPU2_PWM3] = RST_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+ [RST_RCPU2_PWM4] = RST_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+ [RST_RCPU2_PWM5] = RST_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+ [RST_RCPU2_PWM6] = RST_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+ [RST_RCPU2_PWM7] = RST_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+ [RST_RCPU2_PWM8] = RST_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+ [RST_RCPU2_PWM9] = RST_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+};
+
+static const struct ccu_reset_controller_data rcpu2_reset_controller_data = {
+ .count = ARRAY_SIZE(rcpu2_reset_data),
+ .data = rcpu2_reset_data,
+};
+
+static struct k1_ccu_data k1_ccu_rcpu2_data = {
+ /* No clocks in the RCPU2 CCU */
+ .rst_data = &rcpu2_reset_controller_data,
+};
+
+static const struct ccu_reset_data apbc2_reset_data[] = {
+ [RST_APBC2_UART1] = RST_DATA(APBC2_UART1_CLK_RST, BIT(2), (0)),
+ [RST_APBC2_SSP2] = RST_DATA(APBC2_SSP2_CLK_RST, BIT(2), (0)),
+ [RST_APBC2_TWSI3] = RST_DATA(APBC2_TWSI3_CLK_RST, BIT(2), (0)),
+ [RST_APBC2_RTC] = RST_DATA(APBC2_RTC_CLK_RST, BIT(2), (0)),
+ [RST_APBC2_TIMERS0] = RST_DATA(APBC2_TIMERS0_CLK_RST, BIT(2), (0)),
+ [RST_APBC2_KPC] = RST_DATA(APBC2_KPC_CLK_RST, BIT(2), (0)),
+ [RST_APBC2_GPIO] = RST_DATA(APBC2_GPIO_CLK_RST, BIT(2), (0)),
+};
+
+static const struct ccu_reset_controller_data apbc2_reset_controller_data = {
+ .count = ARRAY_SIZE(apbc2_reset_data),
+ .data = apbc2_reset_data,
+};
+
+static struct k1_ccu_data k1_ccu_apbc2_data = {
+ /* No clocks in the RCPU2 CCU */
+ .rst_data = &apbc2_reset_controller_data,
+};
+
static struct ccu_reset_controller *
rcdev_to_controller(struct reset_controller_dev *rcdev)
{
@@ -1959,6 +2053,18 @@ static const struct of_device_id of_k1_ccu_match[] = {
.compatible = "spacemit,k1-syscon-apmu",
.data = &k1_ccu_apmu_data,
},
+ {
+ .compatible = "spacemit,k1-syscon-rcpu",
+ .data = &k1_ccu_rcpu_data,
+ },
+ {
+ .compatible = "spacemit,k1-syscon-rcpu2",
+ .data = &k1_ccu_rcpu2_data,
+ },
+ {
+ .compatible = "spacemit,k1-syscon-apbc2",
+ .data = &k1_ccu_apbc2_data,
+ },
{ }
};
MODULE_DEVICE_TABLE(of, of_k1_ccu_match);
--
2.43.0
