On Wed, 19 Mar 2025 19:02:29 +0200, Flaviu Nistor wrote: > Add device tree bindings and an example for the > TI TPS389008 voltage monitor. > > Signed-off-by: Flaviu Nistor <flaviu.nistor@xxxxxxxxx> > --- > .../bindings/hwmon/ti,tps389008.yaml | 140 ++++++++++++++++++ > 1 file changed, 140 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/ti,tps389008.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/hwmon/ti,tps389008.example.dtb: /example-0/i2c/vmon@37: failed to match any schema with compatible: ['ti,tps389008', 'ti,tps389006', 'ti,tps389004'] Documentation/devicetree/bindings/hwmon/ti,tps389008.example.dtb: /example-0/i2c/vmon@37: failed to match any schema with compatible: ['ti,tps389008', 'ti,tps389006', 'ti,tps389004'] Documentation/devicetree/bindings/hwmon/ti,tps389008.example.dtb: /example-0/i2c/vmon@37: failed to match any schema with compatible: ['ti,tps389008', 'ti,tps389006', 'ti,tps389004'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250319170234.63723-3-flaviu.nistor@xxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
