On Wed, 19 Mar 2025 11:47:57 +0800, Kim Seer Paller wrote: > The AD3530R/AD3530 is an 8-Channel, 16-Bit Voltage Output DAC, while the > AD3531R/AD3531 is a 4-Channel, 16-Bit Voltage Output DAC. These devices > include software-programmable gain controls that provide full-scale > output spans of 2.5V or 5V for reference voltages of 2.5V. They operate > from a single supply voltage range of 2.7V to 5.5V and are guaranteed to > be monotonic by design. Additionally, these devices features a 2.5V, > 5ppm/°C internal reference, which is disabled by default. > > This adds the documentation for ad3530r. > > Signed-off-by: Kim Seer Paller <kimseer.paller@xxxxxxxxxx> > --- > .../devicetree/bindings/iio/dac/adi,ad3530r.yaml | 89 ++++++++++++++++++++++ > MAINTAINERS | 1 + > 2 files changed, 90 insertions(+) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.example.dtb: adc@0: pwm-names: ['convst1'] is too short from schema $id: http://devicetree.org/schemas/iio/adc/adi,ad7606.yaml# doc reference errors (make refcheckdocs): Warning: Documentation/arch/powerpc/cxl.rst references a file that doesn't exist: Documentation/ABI/testing/sysfs-class-cxl Warning: lib/Kconfig.debug references a file that doesn't exist: Documentation/dev-tools/fault-injection/fault-injection.rst Documentation/arch/powerpc/cxl.rst: Documentation/ABI/testing/sysfs-class-cxl lib/Kconfig.debug: Documentation/dev-tools/fault-injection/fault-injection.rst See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250319-togreg-v1-3-d8244a502f2c@xxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
