Re: [PATCH] arm64: dts: rockchip: Improve gmac phy setup for QNAP-TS433

[Heiko Stübner <heiko@xxxxxxxxx>]

Hey Uwe,

Am Dienstag, 18. März 2025, 19:45:49 MEZ schrieb Uwe Kleine-König:
> Instead of relying on the MDIO broadcast address (0) talk to the phy on
> its configured address. Also add the phy reset gpio which was found by
> Heiko inspecting the U-Boot vendor source code. He is still trying to
> recover.

I believe these want to be two separate changes ... as indicated by
the "Also ..." in the commit message:
- reset-gpio addition 
- mdio address change

and I guess both could possibly have a

Fixes: 9da1c0327d58 ("arm64: dts: rockchip: Add basic support for QNAP TS-433")


Heiko

> Signed-off-by: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
> ---
>  .../arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts | 15 +++++++++++++--
>  1 file changed, 13 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
> index 7bd32d230ad2..411f8ac7994b 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
> @@ -481,9 +481,14 @@ eeprom@56 {
>  };
>  
>  &mdio0 {
> -	rgmii_phy0: ethernet-phy@0 {
> +	rgmii_phy0: ethernet-phy@3 {
> +		/* Motorcomm YT8521 phy */
>  		compatible = "ethernet-phy-ieee802.3-c22";
> -		reg = <0x0>;
> +		reg = <0x3>;
> +		pinctrl-0 = <&eth_phy0_reset_pin>;
> +		pinctrl-names = "default";
> +		reset-assert-us = <10000>;
> +		reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>;
>  	};
>  };
>  
> @@ -556,6 +561,12 @@ &pcie3x2 {
>  };
>  
>  &pinctrl {
> +	gmac0 {
> +		eth_phy0_reset_pin: eth-phy0-reset-pin {
> +			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
> +		};
> +	};
> +
>  	keys {
>  		copy_button_pin: copy-button-pin {
>  			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
> 
> base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b
>