Enable the two HDMI ports on ArmSoM W3. And audio output of these two ports are also enabled. Signed-off-by: Jianfeng Liu <liujianfeng1994@xxxxxxxxx> --- .../boot/dts/rockchip/rk3588-armsom-w3.dts | 101 ++++++++++++++++++ 1 file changed, 101 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts b/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts index 779cd1b1798c..6ad2759ddcca 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts @@ -4,6 +4,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/leds/common.h> +#include <dt-bindings/soc/rockchip,vop2.h> #include "rk3588-armsom-lm7.dtsi" / { @@ -32,6 +33,28 @@ analog-sound { pinctrl-0 = <&hp_detect>; }; + hdmi0-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi0_con_in: endpoint { + remote-endpoint = <&hdmi0_out_con>; + }; + }; + }; + + hdmi1-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi1_con_in: endpoint { + remote-endpoint = <&hdmi1_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -138,6 +161,54 @@ &combphy2_psu { status = "okay"; }; +&hdmi0 { + status = "okay"; +}; + +&hdmi0_in { + hdmi0_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi0>; + }; +}; + +&hdmi0_out { + hdmi0_out_con: endpoint { + remote-endpoint = <&hdmi0_con_in>; + }; +}; + +&hdmi0_sound { + status = "okay"; +}; + +&hdmi1 { + status = "okay"; +}; + +&hdmi1_in { + hdmi1_in_vp1: endpoint { + remote-endpoint = <&vp1_out_hdmi1>; + }; +}; + +&hdmi1_out { + hdmi1_out_con: endpoint { + remote-endpoint = <&hdmi1_con_in>; + }; +}; + +&hdmi1_sound { + status = "okay"; +}; + +&hdptxphy0 { + status = "okay"; +}; + +&hdptxphy1 { + status = "okay"; +}; + &i2c6 { status = "okay"; @@ -192,6 +263,14 @@ i2s0_8ch_p0_0: endpoint { }; }; +&i2s5_8ch { + status = "okay"; +}; + +&i2s6_8ch { + status = "okay"; +}; + &package_thermal { polling-delay = <1000>; @@ -406,3 +485,25 @@ &usb_host1_xhci { &usb_host2_xhci { status = "okay"; }; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi0_in_vp0>; + }; +}; + +&vp1 { + vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 { + reg = <ROCKCHIP_VOP2_EP_HDMI1>; + remote-endpoint = <&hdmi1_in_vp1>; + }; +}; -- 2.43.0