On Mon, 17 Mar 2025 10:59:21 +0800, Jacky Chou wrote: > Add tx-internal-delay-ps and rx-internal-delay-ps to > configure the RGMII delay for MAC. According to > ethernet-controller.yaml, they use for RGMII TX and RX delay. > > In Aspeed desgin, the RGMII delay is a number of ps as unit to > set delay, do not use one ps as unit. The values are different > from each MAC. So, here describes the property values > as index to configure corresponding scu register. > > Signed-off-by: Jacky Chou <jacky_chou@xxxxxxxxxxxxxx> > --- > .../bindings/net/faraday,ftgmac100.yaml | 16 +++++++++++++++- > 1 file changed, 15 insertions(+), 1 deletion(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml:71:8: [warning] wrong indentation: expected 6 but found 7 (indentation) ./Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml:78:8: [warning] wrong indentation: expected 6 but found 7 (indentation) ./Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml:119:7: [error] no new line character at the end of file (new-line-at-end-of-file) dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250317025922.1526937-4-jacky_chou@xxxxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
