On Mon, 10 Mar 2025 16:17:43 +0530, Manish Nagar wrote:
> Enable secondary USB controller on QCS8300 Ride platform. Since it is a
> Type-A port, the dr_mode has been set to "host". The VBUS to connected
> peripherals is provided by TPS2559QWDRCTQ1 regulator connected to the
> port. The regulator has an enable pin controlled by PMM8650. Model it as
> fixed regulator and keep it Always-On at boot, since the regulator is
> GPIO controlled regulator.
>
> [...]
Applied, thanks!
[1/1] arm64: dts: qcom: qcs8300-ride: Enable second USB controller on QCS8300 Ride
commit: 64f8541e7a2c5e91498f297bce89a88ab9a34fd3
Best regards,
--
Bjorn Andersson <andersson@xxxxxxxxxx>
