From: Fabio Estevam <festevam@xxxxxxx>
According to mtd-physmap.yaml, 'nor' is not a valid node name.
Change it to 'flash' to fix the following dt-schema warning:
nor@0,0: $nodename:0: 'nor@0,0' does not match '^(flash|.*sram|nand)(@.*)?$'
Signed-off-by: Fabio Estevam <festevam@xxxxxxx>
---
arch/arm/boot/dts/nxp/imx/imx31-lite.dts | 2 +-
arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts | 2 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx31-lite.dts b/arch/arm/boot/dts/nxp/imx/imx31-lite.dts
index d17abdfb6330..630f8fa69ba8 100644
--- a/arch/arm/boot/dts/nxp/imx/imx31-lite.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx31-lite.dts
@@ -157,7 +157,7 @@ &uart3 {
&weim {
status = "okay";
- nor@0,0 {
+ flash@0,0 {
compatible = "cfi-flash";
reg = <0 0x0 0x200000>;
bank-width = <2>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts
index f08b37010291..bba82126aaaa 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts
@@ -279,7 +279,7 @@ &weim {
ranges = <0 0 0x08000000 0x08000000>;
status = "okay";
- nor@0,0 {
+ flash@0,0 {
compatible = "cfi-flash";
reg = <0 0 0x02000000>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
index a381cb224c1e..2587d17c5918 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
@@ -854,7 +854,7 @@ &weim {
ranges = <0 0 0x08000000 0x08000000>;
status = "disabled"; /* pin conflict with SPI NOR */
- nor@0,0 {
+ flash@0,0 {
compatible = "cfi-flash";
reg = <0 0 0x02000000>;
#address-cells = <1>;
--
2.34.1
