From: Nuno Sá <nuno.sa@xxxxxxxxxx>
Add properties related to input events. These devices can act as
keyboards and can support events either via a keymap Matrix or through
GPIs. Note that the device needs to be an interrupt controller for GPIs
based events.
We specifically need a property specifying the pins used by the keymap
matrix since these devices have no requirement for rows and columns to be
contiguous without holes which is enforced by the standard input
properties.
Signed-off-by: Nuno Sá <nuno.sa@xxxxxxxxxx>
---
.../devicetree/bindings/mfd/adi,adp5585.yaml | 188 ++++++++++++++++++++-
1 file changed, 187 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mfd/adi,adp5585.yaml b/Documentation/devicetree/bindings/mfd/adi,adp5585.yaml
index 87256a37b5f4b6a019f581b164c276d8805d2e52..e976c9240df79afae1d0949e6ac91d477bfaceef 100644
--- a/Documentation/devicetree/bindings/mfd/adi,adp5585.yaml
+++ b/Documentation/devicetree/bindings/mfd/adi,adp5585.yaml
@@ -49,6 +49,85 @@ properties:
"#pwm-cells":
const: 3
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ adi,keypad-pins:
+ description: Specifies the pins used for the keypad matrix.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ adi,key-poll-ms:
+ description: Configure time between consecutive scan cycles.
+ enum: [10, 20, 30, 40]
+ default: 10
+
+ adi,unlock-keys:
+ description:
+ Specifies a maximum of 2 keys that can be used to unlock the keypad.
+ If this property is set, the keyboard will be locked and only unlocked
+ after these keys are pressed. The value 127 serves as a wildcard which
+ means any key can be used for unlocking.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 2
+ items:
+ anyOf:
+ - minimum: 1
+ maximum: 88
+ - minimum: 97
+ maximum: 115
+ - const: 127
+
+ adi,unlock-trigger-sec:
+ description:
+ Defines the time in which the second unlock event must occur after the
+ first unlock event has occurred.
+ maximum: 7
+ default: 0
+
+ adi,reset1-keys:
+ description:
+ Defines the trigger events (key presses) that can generate reset
+ conditions one the reset1 block.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 3
+
+ adi,reset2-keys:
+ description:
+ Defines the trigger events (key presses) that can generate reset
+ conditions one the reset2 block.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 2
+
+ adi,reset1-active-high:
+ description: Sets the reset1 signal as active high.
+ type: boolean
+
+ adi,reset2-active-high:
+ description: Sets the reset2 signal as active high.
+ type: boolean
+
+ adi,rst-passtrough-enable:
+ description: Allows the RST pin to override (OR with) the reset1 signal.
+ type: boolean
+
+ adi,reset-trigger-ms:
+ description:
+ Defines the length of time that the reset events must be active before a
+ reset signal is generated. All events must be active at the same time for
+ the same duration.
+ enum: [0, 1000, 1500, 2000, 2500, 3000, 3500, 4000]
+ default: 0
+
+ adi,reset-pulse-width-us:
+ description: Defines the pulse width of the reset signals.
+ enum: [500, 1000, 2000, 10000]
+ default: 500
+
patternProperties:
"-hog(-[0-9]+)?$":
type: object
@@ -56,11 +135,28 @@ patternProperties:
required:
- gpio-hog
+dependencies:
+ linux,keymap:
+ - adi,keypad-pins
+ - interrupts
+ interrupt-controller:
+ - interrupts
+ adi,unlock-trigger-sec:
+ - adi,unlock-keys
+ adi,reset1-active-high:
+ - adi,reset1-keys
+ adi,rst-passtrough-enable:
+ - adi,reset1-keys
+ adi,reset2-active-high:
+ - adi,reset2-keys
+
required:
- compatible
- reg
allOf:
+ - $ref: /schemas/input/matrix-keymap.yaml#
+ - $ref: /schemas/input/input.yaml#
- if:
properties:
compatible:
@@ -68,7 +164,29 @@ allOf:
const: adi,adp5585-01
then:
properties:
+ adi,unlock-keys: false
+ adi,unlock-trigger-sec: false
gpio-reserved-ranges: false
+ adi,keypad-pins:
+ minItems: 2
+ maxItems: 11
+ items:
+ minimum: 0
+ maximum: 10
+ adi,reset1-keys:
+ items:
+ anyOf:
+ - minimum: 1
+ maximum: 30
+ - minimum: 37
+ maximum: 47
+ adi,reset2-keys:
+ items:
+ anyOf:
+ - minimum: 1
+ maximum: 30
+ - minimum: 37
+ maximum: 47
else:
if:
properties:
@@ -81,6 +199,25 @@ allOf:
- adi,adp5585-04
then:
properties:
+ adi,unlock-keys: false
+ adi,unlock-trigger-sec: false
+ adi,keypad-pins:
+ minItems: 2
+ maxItems: 10
+ items:
+ enum: [0, 1, 2, 3, 4, 6, 7, 8, 9, 10]
+ adi,reset1-keys:
+ items:
+ anyOf:
+ - minimum: 1
+ maximum: 25
+ - enum: [37, 38, 39, 40, 41, 43, 44, 45, 46, 47]
+ adi,reset2-keys:
+ items:
+ anyOf:
+ - minimum: 1
+ maximum: 25
+ - enum: [37, 38, 39, 40, 41, 43, 44, 45, 46, 47]
gpio-reserved-ranges:
maxItems: 1
items:
@@ -90,11 +227,33 @@ allOf:
else:
properties:
gpio-reserved-ranges: false
+ adi,keypad-pins:
+ minItems: 2
+ maxItems: 19
+ items:
+ minimum: 0
+ maximum: 18
+ adi,reset1-keys:
+ items:
+ anyOf:
+ - minimum: 1
+ maximum: 88
+ - minimum: 97
+ maximum: 115
+ adi,reset2-keys:
+ items:
+ anyOf:
+ - minimum: 1
+ maximum: 88
+ - minimum: 97
+ maximum: 115
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
@@ -110,6 +269,33 @@ examples:
gpio-reserved-ranges = <5 1>;
#pwm-cells = <3>;
+
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpio>;
+
+ adi,reset1-keys = <1 43>;
+ adi,reset2-keys = <2 3>;
+ adi,reset-trigger-ms = <2000>;
+
+ /*
+ * col0, col1, col2
+ * row0, row1, row2
+ */
+ adi,keypad-pins = <0 1 2 6 7 8>;
+
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x00, KEY_1)
+ MATRIX_KEY(0x00, 0x01, KEY_2)
+ MATRIX_KEY(0x00, 0x02, KEY_3)
+
+ MATRIX_KEY(0x01, 0x00, KEY_A)
+ MATRIX_KEY(0x01, 0x01, KEY_B)
+ MATRIX_KEY(0x01, 0x02, KEY_C)
+
+ MATRIX_KEY(0x02, 0x00, BTN_1)
+ MATRIX_KEY(0x02, 0x01, BTN_2)
+ MATRIX_KEY(0x02, 0x02, BTN_3)
+ >;
};
};
--
2.48.1
