The ROHM BD96805 is from the software perspective almost identical to
the ROHM BD96801. The main difference is different voltage tuning
ranges.
Add support differentiating these PMICs and provide correct voltages
for both models.
Signed-off-by: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
---
drivers/regulator/bd96801-regulator.c | 207 ++++++++++++++++++++++++++
1 file changed, 207 insertions(+)
diff --git a/drivers/regulator/bd96801-regulator.c b/drivers/regulator/bd96801-regulator.c
index 893efdd92008..d829289942f9 100644
--- a/drivers/regulator/bd96801-regulator.c
+++ b/drivers/regulator/bd96801-regulator.c
@@ -83,6 +83,7 @@ enum {
#define BD96801_LDO6_VSEL_REG 0x26
#define BD96801_LDO7_VSEL_REG 0x27
#define BD96801_BUCK_VSEL_MASK 0x1F
+#define BD96805_BUCK_VSEL_MASK 0x3f
#define BD96801_LDO_VSEL_MASK 0xff
#define BD96801_MASK_RAMP_DELAY 0xc0
@@ -90,6 +91,7 @@ enum {
#define BD96801_BUCK_INT_VOUT_MASK 0xff
#define BD96801_BUCK_VOLTS 256
+#define BD96805_BUCK_VOLTS 64
#define BD96801_LDO_VOLTS 256
#define BD96801_OVP_MASK 0x03
@@ -160,6 +162,22 @@ static const struct linear_range bd96801_buck_init_volts[] = {
REGULATOR_LINEAR_RANGE(3300000 - 150000, 0xed, 0xff, 0),
};
+/*
+ * On BD96805 we have similar "negative tuning range" as on BD96801, except
+ * that the max tuning is -310 ... +310 mV (instead of the 150mV). We use same
+ * approach as with the BD96801 ranges.
+ */
+static const struct linear_range bd96805_tune_volts[] = {
+ REGULATOR_LINEAR_RANGE(310000, 0x00, 0x1F, 10000),
+ REGULATOR_LINEAR_RANGE(0, 0x20, 0x3F, 10000),
+};
+
+static const struct linear_range bd96805_buck_init_volts[] = {
+ REGULATOR_LINEAR_RANGE(500000 - 310000, 0x00, 0xc8, 5000),
+ REGULATOR_LINEAR_RANGE(1550000 - 310000, 0xc9, 0xec, 50000),
+ REGULATOR_LINEAR_RANGE(3300000 - 310000, 0xed, 0xff, 0),
+};
+
static const struct linear_range bd96801_ldo_int_volts[] = {
REGULATOR_LINEAR_RANGE(300000, 0x00, 0x78, 25000),
REGULATOR_LINEAR_RANGE(3300000, 0x79, 0xff, 0),
@@ -756,6 +774,194 @@ static const struct bd96801_pmic_data bd96801_data = {
.num_regulators = 7,
};
+static const struct bd96801_pmic_data bd96805_data = {
+ .regulator_data = {
+ {
+ .desc = {
+ .name = "buck1",
+ .of_match = of_match_ptr("buck1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD96801_BUCK1,
+ .ops = &bd96801_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .linear_ranges = bd96805_tune_volts,
+ .n_linear_ranges = ARRAY_SIZE(bd96805_tune_volts),
+ .n_voltages = BD96805_BUCK_VOLTS,
+ .enable_reg = BD96801_REG_ENABLE,
+ .enable_mask = BD96801_BUCK1_EN_MASK,
+ .enable_is_inverted = true,
+ .vsel_reg = BD96801_BUCK1_VSEL_REG,
+ .vsel_mask = BD96805_BUCK_VSEL_MASK,
+ .ramp_reg = BD96801_BUCK1_VSEL_REG,
+ .ramp_mask = BD96801_MASK_RAMP_DELAY,
+ .ramp_delay_table = &buck_ramp_table[0],
+ .n_ramp_values = ARRAY_SIZE(buck_ramp_table),
+ .owner = THIS_MODULE,
+ },
+ .init_ranges = bd96805_buck_init_volts,
+ .num_ranges = ARRAY_SIZE(bd96805_buck_init_volts),
+ .irq_desc = {
+ .irqinfo = (struct bd96801_irqinfo *)&buck1_irqinfo[0],
+ .num_irqs = ARRAY_SIZE(buck1_irqinfo),
+ },
+ }, {
+ .desc = {
+ .name = "buck2",
+ .of_match = of_match_ptr("buck2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD96801_BUCK2,
+ .ops = &bd96801_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .linear_ranges = bd96805_tune_volts,
+ .n_linear_ranges = ARRAY_SIZE(bd96805_tune_volts),
+ .n_voltages = BD96805_BUCK_VOLTS,
+ .enable_reg = BD96801_REG_ENABLE,
+ .enable_mask = BD96801_BUCK2_EN_MASK,
+ .enable_is_inverted = true,
+ .vsel_reg = BD96801_BUCK2_VSEL_REG,
+ .vsel_mask = BD96805_BUCK_VSEL_MASK,
+ .ramp_reg = BD96801_BUCK2_VSEL_REG,
+ .ramp_mask = BD96801_MASK_RAMP_DELAY,
+ .ramp_delay_table = &buck_ramp_table[0],
+ .n_ramp_values = ARRAY_SIZE(buck_ramp_table),
+ .owner = THIS_MODULE,
+ },
+ .irq_desc = {
+ .irqinfo = (struct bd96801_irqinfo *)&buck2_irqinfo[0],
+ .num_irqs = ARRAY_SIZE(buck2_irqinfo),
+ },
+ .init_ranges = bd96805_buck_init_volts,
+ .num_ranges = ARRAY_SIZE(bd96805_buck_init_volts),
+ }, {
+ .desc = {
+ .name = "buck3",
+ .of_match = of_match_ptr("buck3"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD96801_BUCK3,
+ .ops = &bd96801_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .linear_ranges = bd96805_tune_volts,
+ .n_linear_ranges = ARRAY_SIZE(bd96805_tune_volts),
+ .n_voltages = BD96805_BUCK_VOLTS,
+ .enable_reg = BD96801_REG_ENABLE,
+ .enable_mask = BD96801_BUCK3_EN_MASK,
+ .enable_is_inverted = true,
+ .vsel_reg = BD96801_BUCK3_VSEL_REG,
+ .vsel_mask = BD96805_BUCK_VSEL_MASK,
+ .ramp_reg = BD96801_BUCK3_VSEL_REG,
+ .ramp_mask = BD96801_MASK_RAMP_DELAY,
+ .ramp_delay_table = &buck_ramp_table[0],
+ .n_ramp_values = ARRAY_SIZE(buck_ramp_table),
+ .owner = THIS_MODULE,
+ },
+ .irq_desc = {
+ .irqinfo = (struct bd96801_irqinfo *)&buck3_irqinfo[0],
+ .num_irqs = ARRAY_SIZE(buck3_irqinfo),
+ },
+ .init_ranges = bd96805_buck_init_volts,
+ .num_ranges = ARRAY_SIZE(bd96805_buck_init_volts),
+ }, {
+ .desc = {
+ .name = "buck4",
+ .of_match = of_match_ptr("buck4"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD96801_BUCK4,
+ .ops = &bd96801_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .linear_ranges = bd96805_tune_volts,
+ .n_linear_ranges = ARRAY_SIZE(bd96805_tune_volts),
+ .n_voltages = BD96805_BUCK_VOLTS,
+ .enable_reg = BD96801_REG_ENABLE,
+ .enable_mask = BD96801_BUCK4_EN_MASK,
+ .enable_is_inverted = true,
+ .vsel_reg = BD96801_BUCK4_VSEL_REG,
+ .vsel_mask = BD96805_BUCK_VSEL_MASK,
+ .ramp_reg = BD96801_BUCK4_VSEL_REG,
+ .ramp_mask = BD96801_MASK_RAMP_DELAY,
+ .ramp_delay_table = &buck_ramp_table[0],
+ .n_ramp_values = ARRAY_SIZE(buck_ramp_table),
+ .owner = THIS_MODULE,
+ },
+ .irq_desc = {
+ .irqinfo = (struct bd96801_irqinfo *)&buck4_irqinfo[0],
+ .num_irqs = ARRAY_SIZE(buck4_irqinfo),
+ },
+ .init_ranges = bd96805_buck_init_volts,
+ .num_ranges = ARRAY_SIZE(bd96805_buck_init_volts),
+ }, {
+ .desc = {
+ .name = "ldo5",
+ .of_match = of_match_ptr("ldo5"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD96801_LDO5,
+ .ops = &bd96801_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .linear_ranges = bd96801_ldo_int_volts,
+ .n_linear_ranges = ARRAY_SIZE(bd96801_ldo_int_volts),
+ .n_voltages = BD96801_LDO_VOLTS,
+ .enable_reg = BD96801_REG_ENABLE,
+ .enable_mask = BD96801_LDO5_EN_MASK,
+ .enable_is_inverted = true,
+ .vsel_reg = BD96801_LDO5_VSEL_REG,
+ .vsel_mask = BD96801_LDO_VSEL_MASK,
+ .owner = THIS_MODULE,
+ },
+ .irq_desc = {
+ .irqinfo = (struct bd96801_irqinfo *)&ldo5_irqinfo[0],
+ .num_irqs = ARRAY_SIZE(ldo5_irqinfo),
+ },
+ .ldo_vol_lvl = BD96801_LDO5_VOL_LVL_REG,
+ }, {
+ .desc = {
+ .name = "ldo6",
+ .of_match = of_match_ptr("ldo6"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD96801_LDO6,
+ .ops = &bd96801_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .linear_ranges = bd96801_ldo_int_volts,
+ .n_linear_ranges = ARRAY_SIZE(bd96801_ldo_int_volts),
+ .n_voltages = BD96801_LDO_VOLTS,
+ .enable_reg = BD96801_REG_ENABLE,
+ .enable_mask = BD96801_LDO6_EN_MASK,
+ .enable_is_inverted = true,
+ .vsel_reg = BD96801_LDO6_VSEL_REG,
+ .vsel_mask = BD96801_LDO_VSEL_MASK,
+ .owner = THIS_MODULE,
+ },
+ .irq_desc = {
+ .irqinfo = (struct bd96801_irqinfo *)&ldo6_irqinfo[0],
+ .num_irqs = ARRAY_SIZE(ldo6_irqinfo),
+ },
+ .ldo_vol_lvl = BD96801_LDO6_VOL_LVL_REG,
+ }, {
+ .desc = {
+ .name = "ldo7",
+ .of_match = of_match_ptr("ldo7"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD96801_LDO7,
+ .ops = &bd96801_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .linear_ranges = bd96801_ldo_int_volts,
+ .n_linear_ranges = ARRAY_SIZE(bd96801_ldo_int_volts),
+ .n_voltages = BD96801_LDO_VOLTS,
+ .enable_reg = BD96801_REG_ENABLE,
+ .enable_mask = BD96801_LDO7_EN_MASK,
+ .enable_is_inverted = true,
+ .vsel_reg = BD96801_LDO7_VSEL_REG,
+ .vsel_mask = BD96801_LDO_VSEL_MASK,
+ .owner = THIS_MODULE,
+ },
+ .irq_desc = {
+ .irqinfo = (struct bd96801_irqinfo *)&ldo7_irqinfo[0],
+ .num_irqs = ARRAY_SIZE(ldo7_irqinfo),
+ },
+ .ldo_vol_lvl = BD96801_LDO7_VOL_LVL_REG,
+ },
+ },
+ .num_regulators = 7,
+};
+
static int initialize_pmic_data(struct platform_device *pdev,
struct bd96801_pmic_data *pdata)
{
@@ -1053,6 +1259,7 @@ static int bd96801_probe(struct platform_device *pdev)
static const struct platform_device_id bd96801_pmic_id[] = {
{ "bd96801-regulator", (kernel_ulong_t)&bd96801_data },
{ "bd96802-regulator", (kernel_ulong_t)&bd96802_data },
+ { "bd96805-regulator", (kernel_ulong_t)&bd96805_data },
{ },
};
MODULE_DEVICE_TABLE(platform, bd96801_pmic_id);
--
2.48.1
Attachment:
signature.asc
Description: PGP signature
