Append the MHI range to the pcie nodes. Convert reg-names to vertical
list.
Fixes: d80c7fbfa908 ("arm64: dts: qcom: ipq9574: Add PCIe PHYs and controller nodes")
Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
---
New patch introduced in this patchset. MHI range was missed in the
initial post
---
arch/arm64/boot/dts/qcom/ipq9574.dtsi | 40 +++++++++++++++++++++------
1 file changed, 32 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index cac58352182e..c27b3a90bd96 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -880,8 +880,14 @@ pcie1: pcie@10000000 {
<0x10000f20 0xa8>,
<0x10001000 0x1000>,
<0x000f8000 0x4000>,
- <0x10100000 0x1000>;
- reg-names = "dbi", "elbi", "atu", "parf", "config";
+ <0x10100000 0x1000>,
+ <0x000fe000 0x1000>;
+ reg-names = "dbi",
+ "elbi",
+ "atu",
+ "parf",
+ "config",
+ "mhi";
device_type = "pci";
linux,pci-domain = <1>;
bus-range = <0x00 0xff>;
@@ -960,8 +966,14 @@ pcie3: pcie@18000000 {
<0x18000f20 0xa8>,
<0x18001000 0x1000>,
<0x000f0000 0x4000>,
- <0x18100000 0x1000>;
- reg-names = "dbi", "elbi", "atu", "parf", "config";
+ <0x18100000 0x1000>,
+ <0x000f6000 0x1000>;
+ reg-names = "dbi",
+ "elbi",
+ "atu",
+ "parf",
+ "config",
+ "mhi";
device_type = "pci";
linux,pci-domain = <3>;
bus-range = <0x00 0xff>;
@@ -1040,8 +1052,14 @@ pcie2: pcie@20000000 {
<0x20000f20 0xa8>,
<0x20001000 0x1000>,
<0x00088000 0x4000>,
- <0x20100000 0x1000>;
- reg-names = "dbi", "elbi", "atu", "parf", "config";
+ <0x20100000 0x1000>,
+ <0x0008e000 0x1000>;
+ reg-names = "dbi",
+ "elbi",
+ "atu",
+ "parf",
+ "config",
+ "mhi";
device_type = "pci";
linux,pci-domain = <2>;
bus-range = <0x00 0xff>;
@@ -1120,8 +1138,14 @@ pcie0: pci@28000000 {
<0x28000f20 0xa8>,
<0x28001000 0x1000>,
<0x00080000 0x4000>,
- <0x28100000 0x1000>;
- reg-names = "dbi", "elbi", "atu", "parf", "config";
+ <0x28100000 0x1000>,
+ <0x00086000 0x1000>;
+ reg-names = "dbi",
+ "elbi",
+ "atu",
+ "parf",
+ "config",
+ "mhi";
device_type = "pci";
linux,pci-domain = <0>;
bus-range = <0x00 0xff>;
--
2.34.1
