Hi Oleksij
On 3/5/25 14:14, Oleksij Rempel wrote:
This patch series adds support for the Plymovent AQM board based on the
STM32MP151C SoC. Additionally, the ICS-43432 device tree binding is
converted to YAML to address a validation warning.
The ICS-43432 patch resolves one of the devicetree validation warnings.
However, the false-positive warning:
"audio-controller@44004000: port:endpoint: Unevaluated properties are
not allowed ('format' was unexpected)"
remains unresolved. The "format" property is required for proper
functionality of this device.
Best regards,
Oleksij Rempel (4):
dt-bindings: sound: convert ICS-43432 binding to YAML
dt-bindings: arm: stm32: Add Plymovent AQM board
ARM: dts: stm32: Add pinmux groups for Plymovent AQM board
arm: dts: stm32: Add Plymovent AQM devicetree
.../devicetree/bindings/arm/stm32/stm32.yaml | 1 +
.../devicetree/bindings/sound/ics43432.txt | 19 -
.../bindings/sound/invensense,ics43432.yaml | 51 +++
arch/arm/boot/dts/st/Makefile | 1 +
arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi | 292 ++++++++++++++
arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts | 376 ++++++++++++++++++
6 files changed, 721 insertions(+), 19 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/ics43432.txt
create mode 100644 Documentation/devicetree/bindings/sound/invensense,ics43432.yaml
create mode 100644 arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts
--
2.39.5
Series applied on stm32-next.
Thanks
Alex
