Hi Alexandre,
On Mon, Mar 10, 2025 at 11:50 AM Alexandre TORGUE
<alexandre.torgue@xxxxxxxxxxx> wrote:
>
> Hi Dario
>
> On 3/1/25 12:51, Dario Binacchi wrote:
> > Replace the number 2 with the appropriate numerical constant defined in
> > dt-bindings/interrupt-controller/irq.h.
> >
> > Signed-off-by: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
> >
> > ---
> >
> > arch/arm/boot/dts/st/stm32mp157c-dk2.dts | 3 ++-
> > 1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
> > index 5f9c0160a9c4..dcf17c493022 100644
> > --- a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
> > +++ b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
> > @@ -11,6 +11,7 @@
> > #include "stm32mp15-pinctrl.dtsi"
> > #include "stm32mp15xxac-pinctrl.dtsi"
> > #include "stm32mp15xx-dkx.dtsi"
> > +#include <dt-bindings/interrupt-controller/irq.h>
>
> really needed ? as it comes also with
> dt-bindings/interrupt-controller/arm-gic.h
yes, you are right:
stm32mp157c-dk2.dts
--> stm32mp157.dtsi
--> stm32mp153.dtsi
--> stm32mp151.dtsi
#include <dt-bindings/interrupt-controller/arm-gic.h>
I'll submit v2.
Thanks and regards
Dario
>
> > / {
> > model = "STMicroelectronics STM32MP157C-DK2 Discovery Board";
> > @@ -67,7 +68,7 @@ &i2c1 {
> > touchscreen@38 {
> > compatible = "focaltech,ft6236";
> > reg = <0x38>;
> > - interrupts = <2 2>;
> > + interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
> > interrupt-parent = <&gpiof>;
> > touchscreen-size-x = <480>;
> > touchscreen-size-y = <800>;
--
Dario Binacchi
Senior Embedded Linux Developer
dario.binacchi@xxxxxxxxxxxxxxxxxxxx
__________________________________
Amarula Solutions SRL
Via Le Canevare 30, 31100 Treviso, Veneto, IT
T. +39 042 243 5310
info@xxxxxxxxxxxxxxxxxxxx
www.amarulasolutions.com
