Same as RK3568, RK3528 uses SCMI clk instead of standard ARMCLK. Add SCMI clk for CPU, GPU and RNG will also use it. dmesg: [ 0.061333] scmi_core: SCMI protocol bus registered [ 0.125780] scmi_protocol scmi_dev.1: Enabled polling mode TX channel - prot_id:16 [ 0.126628] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled. [ 0.127233] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0 CPU frequency: ~# mhz count=611657 us50=19994 us250=99945 diff=79951 cpu_MHz=1530.080 Changes in v2: Change sram to reserved-memory Chukun Pan (1): arm64: dts: rockchip: enable SCMI clk for RK3528 SoC arch/arm64/boot/dts/rockchip/rk3528.dtsi | 33 ++++++++++++++++++++++++ 1 file changed, 33 insertions(+) -- 2.25.1
