Hi Fabrizio,
On Wed, 5 Mar 2025 at 01:21, Fabrizio Castro
<fabrizio.castro.jz@xxxxxxxxxxx> wrote:
> Document the Renesas RZ/V2H(P) family of SoCs DMAC block.
> The Renesas RZ/V2H(P) DMAC is very similar to the one found on the
> Renesas RZ/G2L family of SoCs, but there are some differences:
> * It only uses one register area
> * It only uses one clock
> * It only uses one reset
> * Instead of using MID/IRD it uses REQ No
> * It is connected to the Interrupt Control Unit (ICU)
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@xxxxxxxxxxx>
> Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> ---
> v4->v5:
> * Removed ACK No from the specification of the dma cell.
> * I have kept the tags received as this is a minor change and the
> structure remains the same as v4. Please let me know if this is
> not okay.
Thanks for the update!
> --- a/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
> +++ b/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
> @@ -61,14 +66,21 @@ properties:
> '#dma-cells':
> const: 1
> description:
> - The cell specifies the encoded MID/RID values of the DMAC port
Please just insert "or the REQ No" and be done with it?
> - connected to the DMA client and the slave channel configuration
> - parameters.
> + For the RZ/A1H, RZ/Five, RZ/G2{L,LC,UL}, RZ/V2L, and RZ/G3S SoCs, the cell
> + specifies the encoded MID/RID values of the DMAC port connected to the
> + DMA client and the slave channel configuration parameters.
> bits[0:9] - Specifies MID/RID value
> bit[10] - Specifies DMA request high enable (HIEN)
> bit[11] - Specifies DMA request detection type (LVL)
> bits[12:14] - Specifies DMAACK output mode (AM)
> bit[15] - Specifies Transfer Mode (TM)
> + For the RZ/V2H(P) SoC the cell specifies the DMAC REQ No and the slave channel
> + configuration parameters.
> + bits[0:9] - Specifies the DMAC REQ No
> + bit[10] - Specifies DMA request high enable (HIEN)
> + bit[11] - Specifies DMA request detection type (LVL)
> + bits[12:14] - Specifies DMAACK output mode (AM)
> + bit[15] - Specifies Transfer Mode (TM)
... so the casual reader doesn't have to look for the (nonexisting)
differences in the other bits.
>
> dma-channels:
> const: 16
> @@ -80,12 +92,29 @@ properties:
> items:
> - description: Reset for DMA ARESETN reset terminal
> - description: Reset for DMA RST_ASYNC reset terminal
> + minItems: 1
>
> reset-names:
> items:
> - const: arst
> - const: rst_async
>
> + renesas,icu:
> + description:
> + On the RZ/V2H(P) SoC configures the ICU to which the DMAC is connected to.
Are other SoCs with ICU planned?
> + It must contain the phandle to the ICU, and the index of the DMAC as seen
> + from the ICU (e.g. parameter k from register ICU_DMkSELy).
This is already described more formally below
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + items:
> + - items:
> + - description: phandle to the ICU node.
> + - description: The DMAC index.
> + 4 for DMAC0
> + 0 for DMAC1
> + 1 for DMAC2
> + 2 for DMAC3
> + 3 for DMAC4
Other SoCs may have other mappings.
So perhaps leave out the translation table, but write:
The number of the DMAC as seen from the ICU, i.e. parameter k from
register ICU_DMkSELy.
This may differ from the actual DMAC instance number!
> +
> required:
> - compatible
> - reg
> @@ -98,13 +127,25 @@ allOf:
> - $ref: dma-controller.yaml#
>
> - if:
> - not:
> - properties:
> - compatible:
> - contains:
> - enum:
> - - renesas,r7s72100-dmac
> + properties:
> + compatible:
> + contains:
> + enum:
> + - renesas,r9a07g043-dmac
> + - renesas,r9a07g044-dmac
> + - renesas,r9a07g054-dmac
> + - renesas,r9a08g045-dmac
> then:
> + properties:
> + reg:
> + minItems: 2
> + clocks:
> + minItems: 2
> + resets:
> + minItems: 2
> +
> + renesas,icu: false
> +
> required:
> - clocks
> - clock-names
> @@ -112,13 +153,42 @@ allOf:
> - resets
> - reset-names
>
> - else:
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: renesas,r7s72100-dmac
> + then:
> properties:
reg:
minItems: 2
> clocks: false
> clock-names: false
> power-domains: false
> resets: false
> reset-names: false
> + renesas,icu: false
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: renesas,r9a09g057-dmac
> + then:
> + properties:
> + reg:
> + maxItems: 1
> + clocks:
> + maxItems: 1
> + resets:
> + maxItems: 1
> +
> + clock-names: false
> + reset-names: false
> +
> + required:
> + - clocks
> + - power-domains
> + - renesas,icu
> + - resets
>
> additionalProperties: false
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
