> From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
> Sent: 05 March 2025 12:39
> Subject: [PATCH v2 2/2] reset: Add USB2PHY control driver for Renesas RZ/V2H(P)
>
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
>
> Add support for the USB2PHY control driver on the Renesas RZ/V2H(P) SoC.
> Make the driver handle reset and power-down operations for the USB2PHY.
>
> Pass OF data to support future SoCs with similar USB2PHY hardware but
> different register configurations. Define device-specific initialization
> values and control register settings in OF data to ensure flexibility
> for upcoming SoCs.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@xxxxxxxxxxx>
> ---
> drivers/reset/Kconfig | 7 +
> drivers/reset/Makefile | 1 +
> drivers/reset/reset-rzv2h-usb2phy-ctrl.c | 223 +++++++++++++++++++++++
> 3 files changed, 231 insertions(+)
> create mode 100644 drivers/reset/reset-rzv2h-usb2phy-ctrl.c
>
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 5b3abb6db248..bac08dae8905 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -218,6 +218,13 @@ config RESET_RZG2L_USBPHY_CTRL
> Support for USBPHY Control found on RZ/G2L family. It mainly
> controls reset and power down of the USB/PHY.
>
> +config RESET_RZV2H_USB2PHY_CTRL
> + tristate "Renesas RZ/V2H(P) (and similar SoCs) USB2PHY control driver"
> + depends on ARCH_RENESAS || COMPILE_TEST
> + help
> + Support for USB2PHY Control found on the RZ/V2H(P) SoC (and similar SoCs).
> + It mainly controls reset and power down of the USB2 PHY.
> +
> config RESET_SCMI
> tristate "Reset driver controlled via ARM SCMI interface"
> depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index 677c4d1e2632..3cb3df018cf8 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -30,6 +30,7 @@ obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o
> obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o
> obj-$(CONFIG_RESET_RASPBERRYPI) += reset-raspberrypi.o
> obj-$(CONFIG_RESET_RZG2L_USBPHY_CTRL) += reset-rzg2l-usbphy-ctrl.o
> +obj-$(CONFIG_RESET_RZV2H_USB2PHY_CTRL) += reset-rzv2h-usb2phy-ctrl.o
> obj-$(CONFIG_RESET_SCMI) += reset-scmi.o
> obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
> obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
> diff --git a/drivers/reset/reset-rzv2h-usb2phy-ctrl.c b/drivers/reset/reset-rzv2h-usb2phy-ctrl.c
> new file mode 100644
> index 000000000000..a6daeaf37e1c
> --- /dev/null
> +++ b/drivers/reset/reset-rzv2h-usb2phy-ctrl.c
> @@ -0,0 +1,223 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Renesas RZ/V2H(P) USB2PHY control driver
> + *
> + * Copyright (C) 2025 Renesas Electronics Corporation
> + */
> +
> +#include <linux/cleanup.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/reset.h>
> +#include <linux/reset-controller.h>
> +
> +struct rzv2h_usb2phy_regval {
> + u16 reg;
> + u16 val;
> +};
> +
> +struct rzv2h_usb2phy_data {
> + const struct rzv2h_usb2phy_regval *init_vals;
> + unsigned int init_val_count;
> +
> + u16 ctrl_reg;
> + u16 ctrl_assert_val;
> + u16 ctrl_deassert_val;
> + u16 ctrl_status_bits;
> + u16 ctrl_release_val;
> +
> + u16 ctrl2_reg;
> + u16 ctrl2_acquire_val;
> + u16 ctrl2_release_val;
> +};
> +
> +struct rzv2h_usb2phy_ctrl_priv {
> + const struct rzv2h_usb2phy_data *data;
> + void __iomem *base;
> + struct device *dev;
> + struct reset_controller_dev rcdev;
> + spinlock_t lock;
> +};
> +
> +#define rcdev_to_priv(x) container_of(x, struct rzv2h_usb2phy_ctrl_priv, rcdev)
> +
> +static int rzv2h_usbphy_ctrl_assert(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + struct rzv2h_usb2phy_ctrl_priv *priv = rcdev_to_priv(rcdev);
> + const struct rzv2h_usb2phy_data *data = priv->data;
> + struct device *dev = priv->dev;
> + int ret;
> +
> + ret = pm_runtime_resume_and_get(dev);
> + if (ret) {
> + dev_err(dev, "pm_runtime_resume_and_get failed\n");
> + return ret;
> + }
> + scoped_guard(spinlock, &priv->lock) {
> + writel(data->ctrl2_acquire_val, priv->base + data->ctrl2_reg);
> + writel(data->ctrl_assert_val, priv->base + data->ctrl_reg);
> + }
> +
> + /* The reset line needs to be asserted for more than 10 microseconds. */
> + udelay(11);
> + pm_runtime_put(dev);
> +
> + return 0;
> +}
> +
> +static int rzv2h_usbphy_ctrl_deassert(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + struct rzv2h_usb2phy_ctrl_priv *priv = rcdev_to_priv(rcdev);
> + const struct rzv2h_usb2phy_data *data = priv->data;
> + struct device *dev = priv->dev;
> + int ret;
> +
> + ret = pm_runtime_resume_and_get(dev);
> + if (ret) {
> + dev_err(dev, "pm_runtime_resume_and_get failed\n");
> + return ret;
> + }
> +
> + scoped_guard(spinlock, &priv->lock) {
> + writel(data->ctrl_deassert_val, priv->base + data->ctrl_reg);
> + writel(data->ctrl2_release_val, priv->base + data->ctrl2_reg);
> + writel(data->ctrl_release_val, priv->base + data->ctrl_reg);
> + }
> +
> + pm_runtime_put(dev);
> +
> + return 0;
> +}
> +
> +static int rzv2h_usbphy_ctrl_status(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + struct rzv2h_usb2phy_ctrl_priv *priv = rcdev_to_priv(rcdev);
> + struct device *dev = priv->dev;
> + int ret;
> + u32 reg;
> +
> + ret = pm_runtime_resume_and_get(dev);
> + if (ret) {
> + dev_err(dev, "pm_runtime_resume_and_get failed\n");
> + return ret;
> + }
> +
> + scoped_guard(spinlock, &priv->lock)
> + reg = readl(priv->base + priv->data->ctrl_reg);
> +
> + pm_runtime_put(dev);
> +
> + return (reg & priv->data->ctrl_status_bits) == priv->data->ctrl_status_bits;
> +}
> +
> +static const struct reset_control_ops rzv2h_usbphy_ctrl_reset_ops = {
> + .assert = rzv2h_usbphy_ctrl_assert,
> + .deassert = rzv2h_usbphy_ctrl_deassert,
> + .status = rzv2h_usbphy_ctrl_status,
> +};
> +
> +static int rzv2h_reset_of_xlate(struct reset_controller_dev *rcdev,
> + const struct of_phandle_args *reset_spec)
> +{
> + /* No special handling needed, we have only one reset line per device */
> + return 0;
> +}
> +
> +static int rzv2h_usb2phy_ctrl_probe(struct platform_device *pdev)
> +{
> + const struct rzv2h_usb2phy_data *data;
> + struct rzv2h_usb2phy_ctrl_priv *priv;
> + struct device *dev = &pdev->dev;
> + struct reset_control *rstc;
> + int error;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + data = of_device_get_match_data(dev);
> + if (!data)
> + return dev_err_probe(dev, -ENODEV,
> + "failed to match device\n");
> +
> + priv->data = data;
> + priv->dev = dev;
> + priv->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(priv->base))
> + return PTR_ERR(priv->base);
> +
> + rstc = devm_reset_control_get_shared_deasserted(dev, NULL);
> + if (IS_ERR(rstc))
> + return dev_err_probe(dev, PTR_ERR(rstc),
> + "failed to get deasserted reset\n");
> +
> + spin_lock_init(&priv->lock);
> + dev_set_drvdata(dev, priv);
> +
> + error = devm_pm_runtime_enable(dev);
> + if (error)
> + return dev_err_probe(dev, error, "Failed to enable pm_runtime\n");
> +
> + error = pm_runtime_resume_and_get(dev);
> + if (error)
> + return dev_err_probe(dev, error, "pm_runtime_resume_and_get failed\n");
> +
> + for (unsigned int i = 0; i < data->init_val_count; i++)
> + writel(data->init_vals[i].val, priv->base + data->init_vals[i].reg);
> +
> + pm_runtime_put(dev);
> +
> + priv->rcdev.ops = &rzv2h_usbphy_ctrl_reset_ops;
> + priv->rcdev.of_reset_n_cells = 0;
> + priv->rcdev.nr_resets = 1;
> + priv->rcdev.of_xlate = rzv2h_reset_of_xlate;
> + priv->rcdev.of_node = dev->of_node;
> + priv->rcdev.dev = dev;
> +
> + return devm_reset_controller_register(dev, &priv->rcdev);
> +}
> +
> +static const struct rzv2h_usb2phy_regval rzv2h_init_vals[] = {
> + { .reg = 0xc10, .val = 0x67c },
> + { .reg = 0xc14, .val = 0x1f },
> + { .reg = 0x600, .val = 0x909 },
> +};
> +
> +static const struct rzv2h_usb2phy_data rzv2h_of_data = {
> + .init_vals = rzv2h_init_vals,
> + .init_val_count = ARRAY_SIZE(rzv2h_init_vals),
> + .ctrl_reg = 0,
> + .ctrl_assert_val = 0x206,
> + .ctrl_status_bits = BIT(2),
> + .ctrl_deassert_val = 0x200,
> + .ctrl_release_val = 0x0,
> + .ctrl2_reg = 0xb04,
> + .ctrl2_acquire_val = 0x303,
> + .ctrl2_release_val = 0x3,
> +};
> +
> +static const struct of_device_id rzv2h_usb2phy_ctrl_match_table[] = {
> + { .compatible = "renesas,r9a09g057-usb2phy-ctrl", .data = &rzv2h_of_data },
> + { /* Sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, rzv2h_usb2phy_ctrl_match_table);
> +
> +static struct platform_driver rzv2h_usb2phy_ctrl_driver = {
> + .driver = {
> + .name = "rzv2h_usb2phy_ctrl",
> + .of_match_table = rzv2h_usb2phy_ctrl_match_table,
> + },
> + .probe = rzv2h_usb2phy_ctrl_probe,
> +};
> +module_platform_driver(rzv2h_usb2phy_ctrl_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Renesas RZ/V2H(P) USB2PHY Control");
> --
> 2.43.0
