Add the system states that are available on am62p SoCs.
Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/ti/k3-am62p.dtsi | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am62p.dtsi b/arch/arm64/boot/dts/ti/k3-am62p.dtsi
index 75a15c368c11b068430362fe0b8d2d9ecc052588..64cd070f196fdd2999ddc7bfee3ac9a03f1366b4 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p.dtsi
@@ -44,6 +44,33 @@ pmu: pmu {
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
+ system-idle-states {
+ system_partial_io: system-partial-io {
+ compatible = "system-idle-state";
+ idle-state-name = "Partial-IO";
+ };
+
+ system_io_ddr: system-io-ddr {
+ compatible = "system-idle-state";
+ idle-state-name = "IO+DDR";
+ };
+
+ system_deep_sleep: system-deep-sleep {
+ compatible = "system-idle-state";
+ idle-state-name = "DeepSleep";
+ };
+
+ system_mcu_only: system-mcu-only {
+ compatible = "system-idle-state";
+ idle-state-name = "MCU Only";
+ };
+
+ system_standby: system-standby {
+ compatible = "system-idle-state";
+ idle-state-name = "Standby";
+ };
+ };
+
cbass_main: bus@f0000 {
compatible = "simple-bus";
#address-cells = <2>;
--
2.47.2
