Add the system states that are available on am62a SoCs.
Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/ti/k3-am62a.dtsi | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am62a.dtsi b/arch/arm64/boot/dts/ti/k3-am62a.dtsi
index 4d79b3e9486af18b8813a8980a57937669ff6095..0b58ade9561a3076fc89f3b85dbafa969285162f 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a.dtsi
@@ -46,6 +46,33 @@ pmu: pmu {
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
+ system-idle-states {
+ system_partial_io: system-partial-io {
+ compatible = "system-idle-state";
+ idle-state-name = "Partial-IO";
+ };
+
+ system_io_ddr: system-io-ddr {
+ compatible = "system-idle-state";
+ idle-state-name = "IO+DDR";
+ };
+
+ system_deep_sleep: system-deep-sleep {
+ compatible = "system-idle-state";
+ idle-state-name = "DeepSleep";
+ };
+
+ system_mcu_only: system-mcu-only {
+ compatible = "system-idle-state";
+ idle-state-name = "MCU Only";
+ };
+
+ system_standby: system-standby {
+ compatible = "system-idle-state";
+ idle-state-name = "Standby";
+ };
+ };
+
cbass_main: bus@f0000 {
compatible = "simple-bus";
#address-cells = <2>;
--
2.47.2
