[PATCH v2 5/8] clk: qcom: videocc-sm8550: Move PLL & clk configuration to really probe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Video PLLs on SM8550/SM8650 require both MMCX and MXC rails to be kept ON
to configure the PLLs properly. Hence move the PLL configuration and
enable critical clocks to qcom_cc_really_probe() which ensures all
required power domains are in enabled state before configuring the PLLs
or enabling the clocks.

Signed-off-by: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
---
 drivers/clk/qcom/videocc-sm8550.c | 50 ++++++++++++++++++---------------------
 1 file changed, 23 insertions(+), 27 deletions(-)

diff --git a/drivers/clk/qcom/videocc-sm8550.c b/drivers/clk/qcom/videocc-sm8550.c
index 7c25a50cfa970dff55d701cb24bc3aa5924ca12d..a1076b5bc2759c0149fa00904c81064f3381254b 100644
--- a/drivers/clk/qcom/videocc-sm8550.c
+++ b/drivers/clk/qcom/videocc-sm8550.c
@@ -51,6 +51,7 @@ static struct alpha_pll_config video_cc_pll0_config = {
 
 static struct clk_alpha_pll video_cc_pll0 = {
 	.offset = 0x0,
+	.config = &video_cc_pll0_config,
 	.vco_table = lucid_ole_vco,
 	.num_vco = ARRAY_SIZE(lucid_ole_vco),
 	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE],
@@ -82,6 +83,7 @@ static struct alpha_pll_config video_cc_pll1_config = {
 
 static struct clk_alpha_pll video_cc_pll1 = {
 	.offset = 0x1000,
+	.config = &video_cc_pll1_config,
 	.vco_table = lucid_ole_vco,
 	.num_vco = ARRAY_SIZE(lucid_ole_vco),
 	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE],
@@ -511,6 +513,17 @@ static const struct qcom_reset_map video_cc_sm8550_resets[] = {
 	[VIDEO_CC_XO_CLK_ARES] = { .reg = 0x8124, .bit = 2, .udelay = 100 },
 };
 
+static struct clk_alpha_pll *video_cc_sm8550_plls[] = {
+	&video_cc_pll0,
+	&video_cc_pll1,
+};
+
+static struct qcom_clk_cfg video_cc_sm8550_clocks_cfg[] = {
+	{ .offset = 0x80f4, .mask = BIT(0) }, /* VIDEO_CC_AHB_CLK */
+	{ .offset = 0x8124, .mask = BIT(0) }, /* VIDEO_CC_XO_CLK */
+	{ .offset = 0x8140, .mask = BIT(0) }, /* VIDEO_CC_SLEEP_CLK */
+};
+
 static const struct regmap_config video_cc_sm8550_regmap_config = {
 	.reg_bits = 32,
 	.reg_stride = 4,
@@ -527,6 +540,11 @@ static struct qcom_cc_desc video_cc_sm8550_desc = {
 	.num_resets = ARRAY_SIZE(video_cc_sm8550_resets),
 	.gdscs = video_cc_sm8550_gdscs,
 	.num_gdscs = ARRAY_SIZE(video_cc_sm8550_gdscs),
+	.plls = video_cc_sm8550_plls,
+	.num_plls = ARRAY_SIZE(video_cc_sm8550_plls),
+	.clks_cfg = video_cc_sm8550_clocks_cfg,
+	.num_clks_cfg = ARRAY_SIZE(video_cc_sm8550_clocks_cfg),
+	.use_rpm = true,
 };
 
 static const struct of_device_id video_cc_sm8550_match_table[] = {
@@ -539,25 +557,12 @@ MODULE_DEVICE_TABLE(of, video_cc_sm8550_match_table);
 static int video_cc_sm8550_probe(struct platform_device *pdev)
 {
 	struct regmap *regmap;
-	int ret;
-	u32 sleep_clk_offset = 0x8140;
-
-	ret = devm_pm_runtime_enable(&pdev->dev);
-	if (ret)
-		return ret;
-
-	ret = pm_runtime_resume_and_get(&pdev->dev);
-	if (ret)
-		return ret;
 
 	regmap = qcom_cc_map(pdev, &video_cc_sm8550_desc);
-	if (IS_ERR(regmap)) {
-		pm_runtime_put(&pdev->dev);
+	if (IS_ERR(regmap))
 		return PTR_ERR(regmap);
-	}
 
 	if (of_device_is_compatible(pdev->dev.of_node, "qcom,sm8650-videocc")) {
-		sleep_clk_offset = 0x8150;
 		video_cc_pll0_config.l = 0x1e;
 		video_cc_pll0_config.alpha = 0xa000;
 		video_cc_pll1_config.l = 0x2b;
@@ -569,21 +574,12 @@ static int video_cc_sm8550_probe(struct platform_device *pdev)
 		video_cc_sm8550_clocks[VIDEO_CC_MVS1_SHIFT_CLK] = &video_cc_mvs1_shift_clk.clkr;
 		video_cc_sm8550_clocks[VIDEO_CC_MVS1C_SHIFT_CLK] = &video_cc_mvs1c_shift_clk.clkr;
 		video_cc_sm8550_clocks[VIDEO_CC_XO_CLK_SRC] = &video_cc_xo_clk_src.clkr;
-	}
-
-	clk_lucid_ole_pll_configure(&video_cc_pll0, regmap, &video_cc_pll0_config);
-	clk_lucid_ole_pll_configure(&video_cc_pll1, regmap, &video_cc_pll1_config);
 
-	/* Keep some clocks always-on */
-	qcom_branch_set_clk_en(regmap, 0x80f4); /* VIDEO_CC_AHB_CLK */
-	qcom_branch_set_clk_en(regmap, sleep_clk_offset); /* VIDEO_CC_SLEEP_CLK */
-	qcom_branch_set_clk_en(regmap, 0x8124); /* VIDEO_CC_XO_CLK */
-
-	ret = qcom_cc_really_probe(&pdev->dev, &video_cc_sm8550_desc, regmap);
-
-	pm_runtime_put(&pdev->dev);
+		/* Sleep clock offset changed to 0x8150 on SM8650 */
+		video_cc_sm8550_clocks_cfg[2].offset = 0x8150;
+	}
 
-	return ret;
+	return qcom_cc_really_probe(&pdev->dev, &video_cc_sm8550_desc, regmap);
 }
 
 static struct platform_driver video_cc_sm8550_driver = {

-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux