Dne torek, 4. marec 2025 ob 23:23:07 Srednjeevropski standardni čas je Andre Przywara napisal(a): > The Radxa A5E is a development board using the Allwinner A527 SoC, which > is using the same die as the A523 SoC, just exposing the pins of more > peripherals (like HDMI or the 2nd MAC). The board features: > > - Allwinner A527/T527 SoC: 8 ARM Cortex-A55 cores, Mali-G57 MC1 GPU > - 1GiB/2GiB/4GiB LPDDR4 DRAM > - AXP717 + AXP323 PMICs > - Raspberry-Pi-2 compatible 40pin GPIO header > - 1 USB 2.0 type C port (OTG), also power supply > - 1 USB 3.0 type A host port (multiplexed with M.2 slot) > - 1 M.2 M-key 2230 slot, with 1 PCIe2.1 lane connected (multiplexed > with USB 3.0 port) > - MicroSD slot > - optional eMMC, 8, 16 or 32GB available > - optional on-board 16MiB bootable SPI NOR flash > - two 1Gbps Ethernet ports (via MAXIO MAE0621A PHYs) > - PoE header for optional supply circuit on one Ethernet port > - WiFi 802.11 a/b/g/n/ac/ax (LB-Link BL-M8800DS2 module using AIC8800) > - HDMI port > - camera and LCD connectors > - power supply via USB-C connector (but no PD) or GPIO header pins > > This .dts describes the devices as far as we support them at the moment. > The PMIC rails have been assigned as per the schematics. > > Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx> Acked-by: Jernej Skrabec <jernej.skrabec@xxxxxxxxx> Best regards, Jernej
