From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
From: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
The Qualcomm UNIPHY PCIe PHY 28LP is found on both IPQ5332 and IPQ5018.
Adding the PHY init sequence, pipe clock rate, and compatible for IPQ5018.
Signed-off-by: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
Signed-off-by: George Moussalem <george.moussalem@xxxxxxxxxxx>
---
.../phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c | 45 +++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c b/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c
index c8b2a3818880..324c0a5d658e 100644
--- a/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c
+++ b/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c
@@ -75,6 +75,40 @@ struct qcom_uniphy_pcie {
#define phy_to_dw_phy(x) container_of((x), struct qca_uni_pcie_phy, phy)
+static const struct qcom_uniphy_pcie_regs ipq5018_regs[] = {
+ {
+ .offset = SSCG_CTRL_REG_4,
+ .val = 0x1cb9,
+ }, {
+ .offset = SSCG_CTRL_REG_5,
+ .val = 0x023a,
+ }, {
+ .offset = SSCG_CTRL_REG_3,
+ .val = 0xd360,
+ }, {
+ .offset = SSCG_CTRL_REG_1,
+ .val = 0x1,
+ }, {
+ .offset = SSCG_CTRL_REG_2,
+ .val = 0xeb,
+ }, {
+ .offset = CDR_CTRL_REG_4,
+ .val = 0x3f9,
+ }, {
+ .offset = CDR_CTRL_REG_5,
+ .val = 0x1c9,
+ }, {
+ .offset = CDR_CTRL_REG_2,
+ .val = 0x419,
+ }, {
+ .offset = CDR_CTRL_REG_1,
+ .val = 0x200,
+ }, {
+ .offset = PCS_INTERNAL_CONTROL_2,
+ .val = 0xf101,
+ },
+};
+
static const struct qcom_uniphy_pcie_regs ipq5332_regs[] = {
{
.offset = PHY_CFG_PLLCFG,
@@ -88,6 +122,14 @@ static const struct qcom_uniphy_pcie_regs ipq5332_regs[] = {
},
};
+static const struct qcom_uniphy_pcie_data ipq5018_data = {
+ .lane_offset = 0x800,
+ .phy_type = PHY_TYPE_PCIE_GEN2,
+ .init_seq = ipq5018_regs,
+ .init_seq_num = ARRAY_SIZE(ipq5018_regs),
+ .pipe_clk_rate = 125 * MEGA,
+};
+
static const struct qcom_uniphy_pcie_data ipq5332_data = {
.lane_offset = 0x800,
.phy_type = PHY_TYPE_PCIE_GEN3,
@@ -212,6 +254,9 @@ static inline int phy_pipe_clk_register(struct qcom_uniphy_pcie *phy, int id)
static const struct of_device_id qcom_uniphy_pcie_id_table[] = {
{
+ .compatible = "qcom,ipq5018-uniphy-pcie-phy",
+ .data = &ipq5018_data,
+ }, {
.compatible = "qcom,ipq5332-uniphy-pcie-phy",
.data = &ipq5332_data,
}, {
--
2.48.1
