Am Dienstag, 4. März 2025, 19:13:10 MEZ schrieb Jonas Karlman: > Hi Heiko, > > On 2025-03-04 13:02, Heiko Stuebner wrote: > > > > On Fri, 28 Feb 2025 06:40:06 +0000, Jonas Karlman wrote: > >> The Radxa E20C has three gpio leds and one gpio button. > >> > >> This series adds dt-binding, driver support, DT node in SoC .dtsi and > >> gpio-keys and gpio-leds nodes in board DT to support the leds and user > >> button. > >> > >> This series builds on top of the "rockchip: Add support for maskrom > >> button on Radxa E20C" series [1]. > >> > >> [...] > > > > Applied, thanks! > > > > [1/7] dt-bindings: soc: rockchip: Add RK3528 ioc grf syscon > > commit: ac32ad07a97648eb8330b2c4cb840b0ef46903ae > > [4/7] arm64: dts: rockchip: Add pinctrl and gpio nodes for RK3528 > > commit: a31fad19ae39ea27b5068e3b02bcbf30a905339b > > [5/7] arm64: dts: rockchip: Add uart0 pinctrl to Radxa E20C > > commit: 0d2312f0d3e4ce74af0977c1519a07dfc71a82ac > > > > Patches 6+7 depend on the parallel saradc support series and thus > > do not apply - and need too much rework to safely apply. > > Do you want me to rebase/reorder and send an updated version with > remaining patches? Look like the iio saradc patches [2] is pending apply > so maybe not needed? Not sure how long the that test run will be taking ... and where after -rc5. But in theory things should be fine though. So essentially up to you - and if you actually have spare minutes. Heiko
