On Mon, 17 Feb 2025 18:55:23 +0100, Stephan Gerhold wrote:
> Add the WiFi/BT nodes for QCP and describe the regulators for the WCN7850
> combo chip using the new power sequencing bindings. All voltages are
> derived from chained fixed regulators controlled using a single GPIO.
>
> The same setup also works for CRD (and likely most of the other X1E80100
> laptops). However, unlike the QCP they use soldered or removable M.2 cards
> supplied by a single 3.3V fixed regulator. The other necessary voltages are
> then derived inside the M.2 card. Describing this properly requires
> new bindings, so this commit only adds QCP for now.
>
> [...]
Applied, thanks!
[1/1] arm64: dts: qcom: x1e80100-qcp: Add WiFi/BT pwrseq
commit: d09ab685a8f51ba412d37305ea62628a01cbea57
Best regards,
--
Bjorn Andersson <andersson@xxxxxxxxxx>
