Since the driver and dt-bindings have been alread merged, it has been agreed offline that there is no point of holding on to these DT patches even though there are some issues with plug/unplug during suspend in both pmic-glink-altmode and ucsi-glink. These issues are being worked on meanwhile. Merging these means that even though this will provide external DP and USB orientation, plug/unplug during suspend will give some splats and render both the USB orientation and DP broken. But then, other X Elite boards already have these nodes described, so lets bring the crd and t14s to the same level. Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx> --- Changes in v6: - Rebased on Bjorn's arm64-for-6.15 branch to fix conflicts with Konrad's X1E CRD DT rework. - Picked up Konrad's and Johan's R-b and T-b tags - Dropped the extra blank line in T14s dts and CRD dtsi i2c7 retimer port@2 reported by Johan - Link to v5: https://lore.kernel.org/r/20250220-x1e80100-dts-crd-t14s-enable-typec-retimers-v5-0-380a3e0e7edc@xxxxxxxxxx --- Abel Vesa (4): arm64: dts: qcom: x1e80100-crd: Describe the Parade PS8830 retimers arm64: dts: qcom: x1e80100-crd: Enable external DisplayPort support arm64: dts: qcom: x1e80100-t14s: Describe the Parade PS8830 retimers arm64: dts: qcom: x1e80100-t14s: Enable external DisplayPort support arch/arm64/boot/dts/qcom/x1-crd.dtsi | 473 ++++++++++++++++++++- .../dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts | 320 +++++++++++++- 2 files changed, 783 insertions(+), 10 deletions(-) --- base-commit: f22be5c1dd3e12519e3f3b80c14d10b90be2c2fc change-id: 20250220-x1e80100-dts-crd-t14s-enable-typec-retimers-325cdb7b097d Best regards, -- Abel Vesa <abel.vesa@xxxxxxxxxx>
