The BCM59054 MFD is fairly similar to the BCM59056, and will use the same driver. Add compatible and specify the allowed regulator nodes. Signed-off-by: Artur Weber <aweber.kernel@xxxxxxxxx> --- Changes in v6: - Replace mfd/brcm,bcm590xx.yaml with mfd/brcm,bcm59056.yaml Changes in v5: - Replace mfd/brcm,bcm59056.yaml with mfd/brcm,bcm590xx.yaml in regulator bindings description Changes in v4: - Fix yamllint errors (missing unevaluatedProperties) - Drop comment with regulator name list - Use full schema paths for $reg - Change description of regulator binding to mention BCM59054 explicitly - Drop quotes around vbus reg name - Change "Power Management IC" to "Power Management Unit" to match official Broadcom naming Note that I did not end up moving the regulator refs from allOf compatible matches; I explained my reasoning in [1]. [1] https://lore.kernel.org/lkml/ab853605-859d-44c6-8cbd-44391cd677e6@xxxxxxxxx/ Changes in v3: - Split regulator node into separate file - Removed quotes around compatible --- .../devicetree/bindings/mfd/brcm,bcm59056.yaml | 26 +++++++++- .../bindings/regulator/brcm,bcm59054.yaml | 56 ++++++++++++++++++++++ 2 files changed, 80 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm59056.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm59056.yaml index b387ef9885c3ac524e0782545dbca9c0e81a556c..b67d7a723fc242869e5bdc6b3602785f62af45bd 100644 --- a/Documentation/devicetree/bindings/mfd/brcm,bcm59056.yaml +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm59056.yaml @@ -11,7 +11,9 @@ maintainers: properties: compatible: - const: brcm,bcm59056 + enum: + - brcm,bcm59054 + - brcm,bcm59056 reg: maxItems: 1 @@ -21,7 +23,6 @@ properties: regulators: type: object - $ref: /schemas/regulator/brcm,bcm59056.yaml# required: - compatible @@ -30,6 +31,27 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + const: brcm,bcm59054 + then: + properties: + regulators: + $ref: /schemas/regulator/brcm,bcm59054.yaml# + + - if: + properties: + compatible: + contains: + const: brcm,bcm59056 + then: + properties: + regulators: + $ref: /schemas/regulator/brcm,bcm59056.yaml# + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/regulator/brcm,bcm59054.yaml b/Documentation/devicetree/bindings/regulator/brcm,bcm59054.yaml new file mode 100644 index 0000000000000000000000000000000000000000..5b46d7fca05e21aa1eae991b5f9f60b444f20c1c --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/brcm,bcm59054.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/brcm,bcm59054.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM59054 Power Management Unit regulators + +description: | + This is a part of device tree bindings for the BCM59054 power + management unit. + + See Documentation/devicetree/bindings/mfd/brcm,bcm59056.yaml for + additional information and example. + +maintainers: + - Artur Weber <aweber.kernel@xxxxxxxxx> + +patternProperties: + "^(cam|sim|mmc)ldo[1-2]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + "^(rf|sd|sdx|aud|mic|usb|vib|tcx)ldo$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + "^(c|mm|v)sr$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + "^(io|sd)sr[1-2]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + "^gpldo[1-3]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + "^lvldo[1-2]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + +properties: + vbus: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + +additionalProperties: false -- 2.48.1
