[PATCH] ARM: dts: microchip: sama7g5: add ADC hw trigger edge type

[Nayab Sayed via B4 Relay <devnull+nayabbasha.sayed.microchip.com@xxxxxxxxxx>]

From: Nayab Sayed <nayabbasha.sayed@xxxxxxxxxxxxx>

Set ADC trigger edge type property as interrupt edge rising value.

Signed-off-by: Nayab Sayed <nayabbasha.sayed@xxxxxxxxxxxxx>
---
 arch/arm/boot/dts/microchip/at91-sama7g5ek.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
index 0f5e6ad438dd..2543599013b1 100644
--- a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
@@ -137,6 +137,7 @@ &adc {
 	vref-supply = <&vddout25>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_mikrobus1_an_default &pinctrl_mikrobus2_an_default>;
+	atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
 	status = "okay";
 };
 

---
base-commit: 99fa936e8e4f117d62f229003c9799686f74cebc
change-id: 20250303-sama7g5-hw-trigger-enable-82b0b3d4042a

Best regards,
-- 
Nayab Sayed <nayabbasha.sayed@xxxxxxxxxxxxx>