Following changes in the clock driver, add matching bus clocks for
existing peripheral clocks. Replace the usb_otg_ahb fixed clock with
the real bus clock.
Signed-off-by: Artur Weber <aweber.kernel@xxxxxxxxx>
---
Changes in v2:
- Add this patch (BCM281xx bus clocks)
---
arch/arm/boot/dts/broadcom/bcm11351.dtsi | 33 ++++++++++++++++++++++----------
1 file changed, 23 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/broadcom/bcm11351.dtsi b/arch/arm/boot/dts/broadcom/bcm11351.dtsi
index 53857e572080d752732c512ed27f942756d59c46..fac5cf5a46bd9a4b7e09a2e65c3e807d1b4ef960 100644
--- a/arch/arm/boot/dts/broadcom/bcm11351.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm11351.dtsi
@@ -233,7 +233,9 @@ aon_ccu: aon_ccu@35002000 {
#clock-cells = <1>;
clock-output-names = "hub_timer",
"pmu_bsc",
- "pmu_bsc_var";
+ "pmu_bsc_var",
+ "hub_timer_apb",
+ "pmu_bsc_apb";
};
master_ccu: master_ccu@3f001000 {
@@ -246,7 +248,14 @@ master_ccu: master_ccu@3f001000 {
"sdio4",
"usb_ic",
"hsic2_48m",
- "hsic2_12m";
+ "hsic2_12m",
+ "sdio1_ahb",
+ "sdio2_ahb",
+ "sdio3_ahb",
+ "sdio4_ahb",
+ "usb_ic_ahb",
+ "hsic2_ahb",
+ "usb_otg_ahb";
};
slave_ccu: slave_ccu@3e011000 {
@@ -262,7 +271,17 @@ slave_ccu: slave_ccu@3e011000 {
"bsc1",
"bsc2",
"bsc3",
- "pwm";
+ "pwm",
+ "uartb_apb",
+ "uartb2_apb",
+ "uartb3_apb",
+ "uartb4_apb",
+ "ssp0_apb",
+ "ssp2_apb",
+ "bsc1_apb",
+ "bsc2_apb",
+ "bsc3_apb",
+ "pwm_apb";
};
ref_1m_clk: ref_1m {
@@ -325,12 +344,6 @@ var_52m_clk: var_52m {
clock-frequency = <52000000>;
};
- usb_otg_ahb_clk: usb_otg_ahb {
- compatible = "fixed-clock";
- clock-frequency = <52000000>;
- #clock-cells = <0>;
- };
-
ref_96m_clk: ref_96m {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -396,7 +409,7 @@ usbotg: usb@3f120000 {
compatible = "snps,dwc2";
reg = <0x3f120000 0x10000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usb_otg_ahb_clk>;
+ clocks = <&master_ccu BCM281XX_MASTER_CCU_USB_OTG_AHB>;
clock-names = "otg";
phys = <&usbphy>;
phy-names = "usb2-phy";
--
2.48.1
