On Tue, 18 Feb 2025 19:26:40 +0100, Ahmad Fatoum wrote:
> Unlike the i.MX8MM and i.MX8MN SoCs added earlier, the imx8mp.dtsi
> configures some clocks at frequencies that are only validated for
> overdrive mode, i.e., when VDD_SOC is 950 mV.
>
> For the Skov i.MX8MP board, we want to run the SoC at the lower voltage of
> 850 mV though to reduce heat generation and power usage. For this to work,
> clock rates need to adhere to the limits of the nominal drive mode.
>
> [...]
Applied, thanks!
[1/6] dt-bindings: clock: imx8m: document nominal/overdrive properties
commit: d5992f1af1550a9e11e42cfa2ca1ad2a1b7fd7f3
[2/6] arm64: dts: imx8mp: Add optional nominal drive mode DTSI
(no commit info)
[3/6] arm64: dts: imx8mp: add fsl,nominal-mode property into nominal.dtsi
(no commit info)
[4/6] arm64: dts: freescale: imx8mp-skov: configure LDB clock automatically
(no commit info)
[5/6] arm64: dts: freescale: imx8mp-skov: operate SoC in nominal mode
(no commit info)
[6/6] clk: imx8mp: inform CCF of maximum frequency of clocks
commit: 06a61b5cb6a8638fa8823cd09b17233b29696fa2
Best regards,
--
Abel Vesa <abel.vesa@xxxxxxxxxx>
