Hi Hrushikesh Salunke,
On Thu, 16 Jan 2025 18:27:26 +0530, Hrushikesh Salunke wrote:
> J722S SOC has two usb controllers USB0 and USB1. USB0 is brought out on
> the EVM as a stacked USB connector which has one Type-A and one Type-C
> port. These Type-A and Type-C ports are connected to MUX so only
> one of them can be enabled at a time.
>
> Commit under Fixes, tries to enable the USB0 instance of USB to
> interface with the Type-C port via the USB hub, by configuring the
> USB2.0_MUX_SEL to GPIO_ACTIVE_HIGH. But it is observed on J722S-EVM
> that Type-A port is enabled instead of Type-C port.
>
> [...]
I have applied the following to branch ti-next on [1].
Thank you!
[1/1] arm64: dts: ti: k3-j722s-evm: Fix USB2.0_MUX_SEL to select Type-C
commit: bc8d9e6b5821c40ab5dd3a81e096cb114939de50
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh
