This patch adds support for the APM X-Gene SoC memory controller EDAC driver for DT. v8: * Change ASM_EDAC_H to __ASM_EDAC_H in file edac.h * Add WARN_ONCE in stub function atomic_scrub * Update DTS binding documentation (with only memory controller node) * Temporary remove L1/L2, L3, and SoC driver code and update memory driver code accordingly v7: * Update binding documentation for memory controller, PMD, L3, and SoC EDAC * Change resource for PCP, CSW, MCBA, MCBB, and efuse to syscon type nodes and updae driver accordingly * Fix clearing L2 RTO register properly * Fix the MODULE_DEVICE_TABLE for OF * Update DT accordingly to binding documentation v6: * Rebase to 4.0.0-rc3 * Add memory scrub stub function and enable ARM64 EDAC support patch * Add bit definition defines for L2RTOS registers * Remove un-necessary clearing of all L1/L2 software generated registers * Remove wrong notification of LSU un-correctable error * Change L2 reporting of un-correcable error to correctable error * Change clearing of the L2C L2RTO registers * Add support for L2 HW version 1 and version 2 or above * Add support for L3 HW version 1 and version 2 or above v5: * Rebase to 3.17.rc1 (next) * Update binding documentation for additional SoC node binding resource * Enable MCU correctable and uncorrectable interrupts if not enabled by firmware * Enable top level interrupt only after all MCU registered. Otherwise, error interrupt will never get cleared by the corresponding MCU. * Remove clearing of L1 and L2 errors during initialization time. Otherwise, they will not be captured between firmware booting and error configuration. * Add capture and clearing SoC register bus errors * Add register bus resource to SoC DT node v4: * Fix PMD l1/l2 error reading address due to wrong variable type * Fix clearing of software generated and HW errors for l1/l2 v3: * Update binding documentation for PMD DT node and exampples * Add binding documentation for SoC DT node * Change MC, PMD, and L3C driver error injection to use debugfs * Add missing IRQ for MC correctable error (code and DT) * Use true/false where appropriate instead 1/0 * Add bit definition for L1 MMUESR register and fully decode this error * Remove the un-necessary dev variable from xgene_edac_pmd_ctx structure * Add check for disabled PMD (code and DT) * Switch to edac_printk instead pr_err * Some minor comments update v2: * Add EDAC entry in MAINTAINERS for APM EDAC driver * Remove the MC scrub patch * Remove the word 'Caches' from Kconfig * Change all MASK defines to use BIT(x) * Update comment or remove them * Wrap error injection code around CONFIG_EDAC_DEBUG * Change function name xgene_edac_mc_hw_init to xgene_edac_mc_irq_ctl * Change all function XXX_hw_init to XXX_hw_ctl * Fix typo 'activie' * Move calling function edac_mc_alloc after resource retrieval * Check for NULL on platform_get_resource return if reference directly * Add documentation for struct xgene_edac_pmd_ctx * Move L1 and L2 check out of function xgene_edac_pmd_check to its own functions * Use for loop for configure each CPU of an PMD * Replace /2 by >> 1 * Remove unnecessary comment on edac_device_add_device failure * Make mem_err_ip static const * Unwind EDAC register correctly if failed --- Loc Ho (5): arm64: Enable EDAC on ARM64 MAINTAINERS: Add entry for APM X-Gene SoC EDAC driver Documentation: Add documentation for the APM X-Gene SoC EDAC DTS binding edac: Add APM X-Gene SoC EDAC driver arm64: Add APM X-Gene SoC EDAC DTS entries .../devicetree/bindings/edac/apm-xgene-edac.txt | 50 ++ MAINTAINERS | 8 + arch/arm64/Kconfig | 1 + arch/arm64/boot/dts/apm/apm-storm.dtsi | 64 +++ arch/arm64/include/asm/edac.h | 28 + drivers/edac/Kconfig | 7 + drivers/edac/Makefile | 1 + drivers/edac/xgene_edac_mc.c | 552 ++++++++++++++++++++ 8 files changed, 711 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/edac/apm-xgene-edac.txt create mode 100644 arch/arm64/include/asm/edac.h create mode 100644 drivers/edac/xgene_edac_mc.c -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html