This patch set adds a reset driver for NXP LPC18xx/43xx devices. Changes in v3: * add patch descriptions * change parameter name in to_rgu_data macro to avoid a potential issue if code is changed. Changes in v2: * clean up header includes * prefix M0 reset defines with LPC43XX * fix comment about M0 reset lines * reorganize reset call chains * add reset number table to dt doc There are no dependencies in this patch set. The DTS changes will be sent separately to arm-soc once this patch set goes upstream. Base support for the NXP LPC18xx family can be found here: http://marc.info/?l=linux-arm-kernel&m=143016894704253&w=2 Joachim Eastwood (2): reset: add driver for lpc18xx rgu doc: dt: add documentation for lpc1850-rgu reset driver .../devicetree/bindings/reset/nxp,lpc1850-rgu.txt | 84 +++++++ drivers/reset/Makefile | 1 + drivers/reset/reset-lpc18xx.c | 258 +++++++++++++++++++++ 3 files changed, 343 insertions(+) create mode 100644 Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt create mode 100644 drivers/reset/reset-lpc18xx.c -- 1.8.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html