Add missing "avdd-0v9-supply" and "avdd-1v8-supply" properties to the "hdmi" node in the Pine64 RockPro64 board dtsi file. To achieve this, also add the associated "vcca_0v9" regulator that produces the 0.9 V supply, [1][2] which hasn't been defined previously in the board dtsi file. This also eliminates the following warnings from the kernel log: dwhdmi-rockchip ff940000.hdmi: supply avdd-0v9 not found, using dummy regulator dwhdmi-rockchip ff940000.hdmi: supply avdd-1v8 not found, using dummy regulator There are no functional changes to the way board works with these additions, because the "vcc1v8_dvp" and "vcca_0v9" regulators are always enabled, [1][2] but these additions improve the accuracy of hardware description. These changes apply to the both supported hardware revisions of the Pine64 RockPro64, i.e. to the production-run revisions 2.0 and 2.1. [1][2] [1] https://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf [2] https://files.pine64.org/doc/rockpro64/rockpro64_v20-SCH.pdf Suggested-by: Diederik de Haas <didi.debian@xxxxxxxxx> Signed-off-by: Dragan Simic <dsimic@xxxxxxxxxxx> --- arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi index 69a9d6170649..47dc198706c8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi @@ -227,6 +227,16 @@ vcc5v0_usb: regulator-vcc5v0-usb { vin-supply = <&vcc12v_dcin>; }; + vcca_0v9: regulator-vcca-0v9 { + compatible = "regulator-fixed"; + regulator-name = "vcca_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc3v3_sys>; + }; + vdd_log: regulator-vdd-log { compatible = "pwm-regulator"; pwms = <&pwm2 0 25000 1>; @@ -312,6 +322,8 @@ &gmac { }; &hdmi { + avdd-0v9-supply = <&vcca_0v9>; + avdd-1v8-supply = <&vcc1v8_dvp>; ddc-i2c-bus = <&i2c3>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_cec>;
