Aside comments from Yixuan, appending more ...
Change title to: "[PATCH] riscv: sophgo: dts: Add spi controller for SG2042"
The prefix sequence is required from my previous review experience, and
we are adding controller node.
On 2025/2/28 11:55, Yixun Lan wrote:
Hi Zixian:
On 10:47 Fri 28 Feb , Zixian Zeng wrote:
Add spi devices for the sg2042 soc.
Change to:
```
Add spi controllers for SG2042.
SG2042 uses the upstreamed Synopsys DW SPI IP.
```
This way, everyone can better understand why "snps,dw-apb-ssi" is used
in the code.
Signed-off-by: Zixian Zeng <sycamoremoon376@xxxxxxxxx>
---
arch/riscv/boot/dts/sophgo/sg2042.dtsi | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/riscv/boot/dts/sophgo/sg2042.dtsi b/arch/riscv/boot/dts/sophgo/sg2042.dtsi
index 0fca16c469cc95aa897b6b57e0a287a687b4d251..d413daa47cf081f23284851db1eeceb3a157e9c0 100644
--- a/arch/riscv/boot/dts/sophgo/sg2042.dtsi
+++ b/arch/riscv/boot/dts/sophgo/sg2042.dtsi
@@ -800,5 +800,35 @@ flash@0 {
compatible = "jedec,spi-nor";
};
};
+
+ spi0: spi@7040004000 {
Order the nodes please, see
https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-nodes.
+ compatible = "snps,dw-apb-ssi";
+ #address-cells = <0x01>;
+ #size-cells = <0x00>;
+ reg = <0x70 0x40004000 0x00 0x1000>;
for consistency, I'd suggest moving 'reg' info above '#address-cells'
+ interrupt-parent = <&intc>;
+ interrupts = <110 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkgen GATE_CLK_APB_SPI>,
+ <&clkgen GATE_CLK_SYSDMA_AXI>;
+ clock-frequency = <250000000>;
Have you run dtb check at your side before sending out the patch? I ran
and got following errors:
```
/home/u/ws/dev-linux/out-linux/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dtb:
spi@7040004000: Unevaluated properties are not allowed
('clock-frequency' was unexpected)
from schema $id:
http://devicetree.org/schemas/spi/snps,dw-apb-ssi.yaml#
/home/u/ws/dev-linux/out-linux/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dtb:
spi@7040005000: Unevaluated properties are not allowed
('clock-frequency' was unexpected)
from schema $id:
http://devicetree.org/schemas/spi/snps,dw-apb-ssi.yaml#
```
You can run `make CHECK_DTBS=y W=1 sophgo/sg2042-milkv-pioneer.dtb`.
ditto, move clock above interrupt
+ resets = <&rstgen RST_SPI0>;
+ num-cs = <0x02>;
+ status = "okay";
in dtsi file, please make status disabled by default, then enable it at board file
+ };
+
+ spi1: spi@7040005000 {
+ compatible = "snps,dw-apb-ssi";
+ #address-cells = <0x01>;
+ #size-cells = <0x00>;
+ reg = <0x70 0x40005000 0x00 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkgen GATE_CLK_APB_SPI>,
+ <&clkgen GATE_CLK_SYSDMA_AXI>;
+ clock-frequency = <250000000>;
+ resets = <&rstgen RST_SPI1>;
+ num-cs = <0x02>;
+ status = "okay";
+ };
};
};
---
base-commit: 9ef5d3235d41a6f5230d3ddf5eb994483853b3e8
What's this base? I can not see it in lastest master. Make sure your
patch is based on the lastest master or at least an official RC tag such
as v6.14-rcX.
change-id: 20250228-sfg-spi-e3f2aeca09ab
Best regards,
--
Zixian Zeng <sycamoremoon376@xxxxxxxxx>
